Black Full LED Headlights Pair w/ LED Module for Cadillac Escalade Sport (2021-2024)

Black Full LED Headlights Pair w/ LED Module for Cadillac Escalade Sport (2021-2024)

$619.95
Ir directamente a la información del producto
Black Full LED Headlights Pair w/ LED Module for Cadillac Escalade Sport (2021-2024)

Black Full LED Headlights Pair w/ LED Module for Cadillac Escalade Sport (2021-2024)

$619.95
DS-85750335

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Replace hazy or damaged headlights on your 2021-2024 Cadillac Escalade Sport or Sport Platinum (black bezel) with this new full LED pair. Bulbs and LED module included per the listing.

Fitment

Year Make / Model Fits
2021-2024 Cadillac Escalade / Escalade ESV Sport and Sport Platinum (black bezel) Factory LED headlights

Will NOT fit: Luxury / Premium (chrome bezel); Escalade-V; 2015-2020 Escalade.

Common Reasons to Replace

  • Yellowed, hazy, or oxidized lenses reducing light output
  • Cracked lens or broken mounting tabs
  • Moisture or condensation inside the housing
  • Collision damage

Specs

  • Low/high beam, DRL, turn: built-in LED
  • Bezel: Black
  • LED module included (per listing)
  • DOT compliant
  • Quantity: Pair (Left + Right)
  • Condition: New

Interchange Part Numbers

OEM: 85750335, 85152293, 85619316, 86771967, 84950148, 85067787, 884869560, 84884860, 84910948, 84950149, 85000994, 85067788, 85152296, 85619317, 86771968. Partslink: GM2503528, GM2502528.

What's Included

  • 1 x Driver side headlight assembly
  • 1 x Passenger side headlight assembly
  • Left and right headlights

Installation

  1. Open the hood and remove the 14 push pins on the upper fascia cover, then the eight 10 mm bolts along the top of the fascia and the 2 harness clips.
  2. Unplug the fog/sensor harness on the passenger side.
  3. Remove the 7 mm wheel-liner screws, the eight 10 mm bolts under the fascia and the push pin in front of each tire.
  4. Pry the fascia-to-fender clips at each corner, unclip the 2 tabs behind the grille and pull the fascia off with a helper.
  5. Remove the two upper 10 mm headlamp bolts and the side 10 mm bolt, slide the lamp forward, lift the red connector lock (CPA) and swing the lever to unplug.
  6. Install the new headlights in reverse order, test every function and check aim.

Steps compiled from the CURT 70111 install sheet for 2021+ Tahoe/Yukon/Escalade (fascia removal) and the DIY Master Tech 2021+ Escalade headlight replacement video. Professional installation and headlight aiming are recommended.

FAQs

Will these fit an Escalade Luxury or Premium?
No. The listing photo shows the chrome-bezel Luxury/Premium lamps do not match.

Will these fit a 2020 Escalade?
No. The 2021 redesign uses a different lamp.

Will I need any coding?
It should be a plug-in swap when you replace the same factory LED headlight type. If a dash warning appears, a dealer or scan tool can clear it.

Do I need to remove the front bumper to replace these headlights?
Yes. The front fascia comes off to reach the three headlamp bolts.

What bulbs do these use?
None to buy for the headlights. Low and high beams are built-in LED.

Can I install LED or HID kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.

También te puede interesar