Black Halogen Headlights Pair for Chevy Equinox (2005-2009)

Black Halogen Headlights Pair for Chevy Equinox (2005-2009)

$99.95
Ir directamente a la información del producto
Black Halogen Headlights Pair for Chevy Equinox (2005-2009)

Black Halogen Headlights Pair for Chevy Equinox (2005-2009)

$99.95
DS-15888058-BK

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Fitment warning: Fits 2005-2009 Chevrolet Equinox. Bulbs are not included.

New black halogen headlights, sold as a driver-side and passenger-side pair for the 2005-2009 Chevrolet Equinox application listed below.

Fitment

Years Vehicle Notes
2005-2009 Chevrolet Equinox See fitment warning

Specs

  • Condition: New
  • Sold as: Left and right pair
  • Style: Black
  • Lighting type: Halogen
  • Bulb application: 9007 combined high/low beam; 1156NA turn signal; 194 side marker
  • Bulbs not included

Shop by bulb size: 9007 | 1156NA

In the Box

  • 1 driver-side headlight assembly
  • 1 passenger-side headlight assembly

Interchange References

15888058, 15888059, GM2503254, GM2502254

Installation: 2005-2009 Chevrolet Equinox

Professional installation and beam aiming are recommended.

  1. Carefully pry off the grille center bar; its rear plastic clips lock into the headlight edges. Replace any broken edge clips with spares from the middle of the bar.
  2. Remove the two small upper bolts and the lower 10 mm bolt deep at the side of the lamp (often thread-locked). Lift the rear locking tab, pull the lamp down and out off its lower pivot ball and disconnect the sockets.
  3. Transfer compatible 9007, 1156-type signal and 194 marker bulbs. Route the wiring below the metal support, seat the lamp, start the upper bolts without overtightening the small fasteners, then install the lower bolt and snap the center bar back on. Test and aim the lamps.

Frequently Asked Questions

What should I check before ordering?
Fits 2005-2009 Chevrolet Equinox. Bulbs are not included.

Are bulbs included?
No. This package contains the headlight assemblies only; bulbs are not included.

What access is needed to replace the assemblies?
Carefully pry off the grille center bar; its rear plastic clips lock into the headlight edges. Replace any broken edge clips with spares from the middle of the bar.

También te puede interesar