Black Halogen Headlights Pair for Honda Pilot and Ridgeline (2016-2018)
$312.95
Ir directamente a la información del producto
Black Halogen Headlights Pair for Honda Pilot and Ridgeline (2016-2018)
$312.95
DS-33100TG7A02
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2016-2018 Honda Pilot with factory halogen lamps (33100-TG7-A02 / 33150-TG7-A02) — not Elite or other LED-low projector trims — and the 2017-2018 Ridgeline with factory halogen lamps (not RTL-E or Black Edition). They will not fit 2019-2020 Ridgeline, 2019-2021 Pilot, or the earlier Pilot and Ridgeline generations (2012-2015 Pilot halogen pair, 2009-2011 Pilot halogen pair, 2006-2014 Ridgeline halogen pair). The LED-low projector lamp is a different part number (33100-TG7-A21).
Replace faded or cracked factory halogen lamps on your 2016-2018 Pilot (not Elite) or 2017-2018 Ridgeline (not RTL-E or Black Edition) with this OE-style black-housing pair. Each lamp has the halogen low and high beam and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your H11 low-beam and 9005 high-beam bulbs, or add new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2016-2018 | Honda Pilot LX, EX, EX-L, Touring | Factory halogen only (33100-TG7-A02). Not Elite / LED-low projector. |
| 2017-2018 | Honda Ridgeline RT, Sport, RTL, RTL-T | Factory halogen only. Not RTL-E or Black Edition. Not 2019-2020. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber side marker, halogen projector
- Low beam: H11; high beam: 9005
- Bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight (33100-TG7-A02)
- Passenger-side halogen headlight (33150-TG7-A02)
Interchange References
Replaces the original assemblies commonly crossed with 33100-TG7-A02, 33150-TG7-A02, HO2502165, HO2503165.
Installation: Honda Pilot (2016-2018) and Ridgeline (2017-2018)
On these Pilot and Ridgeline years the front bumper cover has to come off to reach the headlight bolts. Plan on a helper, trim tools and spare bumper clips. Work with a shop manual for your year and trim. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the fasteners across the top of the bumper and grille, the screws in each wheel well and the bolts underneath, then release each bumper corner from the fender.
- With a helper, ease the cover forward, unplug any fog light or similar connectors and set the cover on a soft surface.
- Unplug the headlight connector, remove the mounting bolts and lift the lamp out.
- Transfer your H11 and 9005 bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the bumper, reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Will these fit a 2016-2018 Pilot Elite?
No. Elite used the LED-low projector lamp (33100-TG7-A21), a different housing.
Will they fit a 2017-2018 Ridgeline RTL-E or Black Edition, or a 2019-2020 Ridgeline?
No. RTL-E and Black Edition used the LED-low projector. These halogen lamps are for 2017-2018 Ridgeline halogen trims only, not 2019-2020.
Do I need new bulbs?
No. Reuse your H11 low-beam and 9005 high-beam bulbs, or add new ones. Bulbs are not included.
Do I have to cut or splice wiring?
No. The lamps plug into the factory connectors and bolt to the factory points.