Black Halogen Headlights Pair with Built-In Fog Lights for Jeep Liberty (2008-2012)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Refresh a faded 2008-2012 Liberty with a black halogen headlight pair. You get driver and passenger assemblies with a clear lens, black housing, and a built-in fog light in the bottom of each housing. Each headlight uses an included H13 bulb for high and low beam. The integrated fog light takes an H10 bulb.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2008-2012 | Jeep Liberty | KK body, black-housing halogen headlight with built-in fog light |
Specs
- Sold as: a driver and passenger pair
- Style: black housing, clear lens, built-in fog light at the bottom of each housing
- Lighting: halogen high and low beam, H13 bulbs included; integrated fog light uses H10
- 12 V
- New aftermarket assemblies
In the Box
- Driver and passenger black halogen headlights with built-in fog lights
- 2 H13 headlight bulbs
Interchange References
Replaces original-style 2008-2012 Liberty headlights commonly crossed with 55157339AE, 55157338AE, CH2502196, and CH2503196.
Installation: Jeep Liberty (2008-2012)
On the KK Liberty these headlights bolt to the front of the inner structure behind the grille opening. The fog light is built into the bottom of the headlight, so it comes out with the assembly — there is no separate bumper fog lamp to remove. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Open the hood. Unplug the H13 connector and the fog-light connector on each side.
- Remove the bolts along the top of the headlight. If a lower fastener is hidden, loosen the inner fender liner or the corner of the bumper cover just enough to reach it — do not force the housing out against the grille.
- Lift out the old assembly, transfer or install the included H13 bulb in the new headlight, and confirm the fog-light bulb is seated if you are reusing it.
- Set the new headlight in the opening, start all bolts by hand, then tighten them evenly so the housing sits flush to the fender and grille.
- Reconnect the connectors and the battery. Test high beam, low beam, and the built-in fog light. Aim the headlights on a level surface before driving at night.
Frequently Asked Questions
Which Jeeps does this pair fit?
Jeep Liberty (2008-2012) KK-body models with this black-housing halogen assembly and built-in fog light. Compare your current housings with our photos before ordering.
Will it fit a 2002-2007 Liberty?
No. The 2002-2007 KJ Liberty uses a different headlight. Do not order this pair for those years.
Are bulbs included?
Yes. Each pair includes two H13 bulbs for high and low beam. The built-in fog light uses an H10 bulb.
Are the fog lights a separate bumper kit?
No. This is a pair of headlight assemblies. On the 2008-2012 Liberty the fog light is built into the bottom of each headlight housing.