Black Halogen Headlights Pair for Mazda 3 Sedan (2004-2009)

Give your Mazda 3 Sedan a cleaner, sharper front end. This black-housing halogen pair replaces tired, hazy headlights on the 2004-2009 Sedan, and it plugs into the factory connector with no splicing. Both lamps are DOT and SAE compliant.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing / style: black halogen housing, clear lens
• Lighting: halogen, bulbs not included
• Plugs into the factory connector (no splicing)
• DOT and SAE compliant
• New aftermarket assemblies, designed to replace the factory halogen units

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly

Interchange References

Replaces the original halogen housings used under OEM BN8P-51-0L0D (driver) and BN8P-51-0K0D (passenger), and Partslink MA2518108 / MA2519108.

Installation: Mazda 3 Sedan (2004-2009)

On the 2004-2009 Mazda 3, the front bumper cover has to come off to reach the headlight bolts. Professional installation and beam aiming are recommended. Turn off the lights and ignition and disconnect the negative battery cable before you start.

1. Open the hood and remove the screws and clips along the top of the bumper cover and grille.
2. Remove the 10 mm bolts under the bumper and the 10 mm bolt in each wheel well. Pull the bumper cover forward, unplug any fog-light or sensor wiring, and set it aside.
3. Remove the two lower 10 mm headlight bolts, the upper 10 mm bolt, and the clip. Pull the headlight forward and unplug the connector.
4. Move your bulbs into the new headlight, plug it in, and install the bolts and clip. Repeat on the other side.
5. Reinstall the bumper cover, reconnect the battery, test all functions, and aim the lamps before night driving.

Frequently Asked Questions

Which vehicles do these headlights fit?
2004-2009 Mazda 3 Sedan with factory halogen headlights. They do not fit the Mazda 3 Hatchback or cars with factory HID / Xenon headlights. Compare your current lamps with our photos before ordering.

Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Do they include bulbs?
No. Bulbs are not included. Move your existing bulbs to the new assemblies or buy new ones.

Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory headlight connector.

How are they installed on a 2004-2009 Mazda 3 Sedan?
The front bumper cover comes off first: the upper screws and clips, the 10 mm bolts under the bumper, and one 10 mm bolt in each wheel well. Each headlight is held by three 10 mm bolts and a clip. Move your bulbs to the new lamp, reinstall, and aim before night driving.