Black Halogen Headlights Pair without DRL for Volkswagen Golf (2015-2017)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace faded or cracked factory halogen lamps on your 2015-2017 Golf with this OE-style black-housing pair without a daytime running light bar. Each lamp has a halogen projector, a chrome reflector and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your H7 low-beam bulbs, or add new ones. Confirm the high-beam size on your original lamp before you order a replacement — published sizes for this housing disagree.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2015-2017 | Volkswagen Golf | Mk7 factory halogen without a DRL bar. Not GTI, Golf R, e-Golf, Sportwagen, or 2014. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, chrome reflector, amber side marker, no daytime running light bar
- Low beam: H7
- High beam: confirm the size on your original lamp — published sizes disagree
- Bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight (5GM941005C)
- Passenger-side halogen headlight (5GM941006C)
Interchange References
Replaces the original assemblies commonly crossed with 5GM941005C, 5GM941006C, VW2502160, VW2503160.
Installation: Volkswagen Golf (2015-2017)
On the 2015-2017 Golf (Mk7) you can usually reach the headlight bolts after pulling the inner fender liner back; some cars also need the bumper cover loosened. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood and turn the wheels outward on the side you are working on. Remove the fasteners along the inner fender liner and pull the liner back to expose the headlight bolts.
- If a bolt or clip is still hidden, loosen the bumper cover on that corner rather than forcing the lamp.
- Unplug the headlight connector, remove the mounting bolts and lift the lamp out.
- Transfer your H7 low-beam bulb if you are reusing it, and transfer the high-beam bulb after you confirm its size on the original lamp. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the liner (and bumper if you loosened it), reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Will these fit a GTI, Golf R, e-Golf or Sportwagen?
No. Those models use different housings. These are for 2015-2017 Golf with factory halogen lamps and no DRL bar.
Will they fit a 2014 Golf?
No. These are for 2015-2017 Golf as listed above.
What bulbs do I need?
Reuse your H7 low-beam bulbs, or add new ones. Confirm the high-beam size on your original lamp — published sizes for this housing disagree. Bulbs are not included.
Do I have to cut or splice wiring?
No. The lamps plug into the factory connectors and bolt to the factory points.