Black HID Headlights Pair without AFS for Audi A4 and S4 (2009-2012)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace faded or cracked factory non-AFS HID lamps on your 2009-2012 Audi A4 or 2010-2012 S4 (B8) with this black-housing pair. Each lamp has an LED daytime running light and a side marker, bolts to the factory points, and plugs into the factory connectors, with no splicing.
Important Fitment Note: Fits factory HID headlights without AFS / adaptive lighting only: A4 for 2009-2012 and S4 for 2010-2012. Not halogen. Not AFS. Not 2009 S4. Not Allroad. Reuse your original HID bulbs and ballast.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2009-2012 | Audi A4 | Factory HID without AFS / adaptive lighting. Not halogen. Not AFS. Not Allroad. |
| 2010-2012 | Audi S4 | Factory HID without AFS / adaptive lighting. Not 2009 S4. Not halogen. Not AFS. Not Allroad. |
Specs
- Sold as: driver and passenger pair (two lamps)
- Housing: black, clear lens, LED daytime running light, side marker
- Lighting: HID (bulbs and ballast not included; reuse your original factory HID components)
- Daytime running light: LED, built in
- AFS / adaptive lighting: no
- DOT and SAE compliant
- Plugs into the factory connectors (no splicing)
Interchange
Replaces / cross-references: 8K0941029AL, 8K0941030AL, 8K0941029BC, 8K0941030BC, AU2502150, AU2503150
What's included
- 1x driver side (left) HID headlight housing (8K0941029AL)
- 1x passenger side (right) HID headlight housing (8K0941030AL)
- HID bulbs and ballast are not included — reuse your original factory HID components
Installation — 2009-2012 Audi A4 / 2010-2012 S4 (B8)
Tools: socket set, screwdrivers, plastic trim tools, and a helper for the bumper cover. Estimated time: about 1.5 to 3 hours.
- Park on level ground, open the hood, turn the lights and ignition off, and disconnect the negative battery cable. On the 2009-2012 A4 and 2010-2012 S4 (B8) the front bumper cover typically comes off so you can reach the headlight bolts.
- Remove the fasteners across the top of the bumper and grille, the screws in each front wheel well, and the bolts along the lower edge, then release each bumper corner from the fender.
- With a helper, ease the cover forward, unplug any fog-lamp or similar connectors, and set the cover on a soft surface.
- Unplug the headlight and ballast connectors, remove the mounting bolts, and lift each lamp out. Leave the factory ballast and HID bulb with the vehicle so you can transfer them.
- Transfer your original HID bulb and ballast to the new housing, set the lamp in place, install the bolts, and reconnect the factory connectors. Repeat on the other side.
- Refit the bumper cover and all fasteners, reconnect the battery, test the HID beams, LED daytime running lights, turn signals, and side markers, then aim the beams on a level surface.
Buyer FAQ
Will these fit a 2009-2012 Audi A4 or S4 with AFS / adaptive headlights, or a halogen model? No. These fit 2009-2012 A4 and 2010-2012 S4 models with factory HID headlights and no AFS / adaptive lighting. They will not fit AFS housings, halogen lamps, 2009 S4, or Allroad.
Are the HID bulbs and ballast included? No. Reuse your original factory HID bulbs, ballast, and related HID components. Bulb size is not given here because it is not proven from the product photos, so confirm the bulb your car uses before ordering replacements.
Do they plug into the factory connectors? Yes. They bolt to the factory points and plug into the factory connectors, with no splicing. Replaces 8K0941029AL, 8K0941030AL, 8K0941029BC, and 8K0941030BC.