Black LED Headlights Pair for Honda Pilot, Ridgeline and Passport (2016-2021)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace faded or cracked factory LED-low projector lamps on the Honda Pilot, Ridgeline and Passport years and trims listed below with this OE-style black-housing pair. Each lamp has a sealed LED low-beam projector, a replaceable 9005 high beam, an LED daytime running light and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your 9005 high-beam bulbs, or add new ones. The low beam is sealed LED — there is no replaceable low-beam bulb.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2016-2018 | Honda Pilot Elite | Factory auto-dimming LED-low projector only (33100-TG7-A21). Not halogen trims. |
| 2019-2021 | Honda Pilot EX, LX, EX-L; 2021 SE | Factory LED-low projector. Not 2022. |
| 2017-2020 | Honda Ridgeline RTL-E and Black Edition | Factory LED-low projector only. Not halogen trims. |
| 2019-2021 | Honda Passport | Factory LED-low projector. Not 2022. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber side marker, sealed LED low-beam projector and LED daytime running light
- Low beam: sealed LED (not a replaceable bulb); high beam: 9005
- High-beam bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side LED headlight (33100-TG7-A21)
- Passenger-side LED headlight (33150-TG7-A21)
Interchange References
Replaces the original assemblies commonly crossed with 33100-TG7-A21, 33150-TG7-A21, HO2503172, HO2502172.
Installation: Honda Pilot (2016-2021), Ridgeline (2017-2020) and Passport (2019-2021)
On these Pilot, Ridgeline and Passport years the front bumper cover has to come off to reach the headlight bolts. Plan on a helper, trim tools and spare bumper clips. Work with a shop manual for your year and trim. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the fasteners across the top of the bumper and grille, the screws in each wheel well and the bolts underneath, then release each bumper corner from the fender.
- With a helper, ease the cover forward, unplug any fog light or similar connectors and set the cover on a soft surface.
- Unplug the headlight connectors, remove the mounting bolts and lift the lamp out. These lamps are heavier than a halogen unit; support the housing as you lift it.
- Transfer your 9005 high-beam bulbs if you are reusing them. The low beam is sealed LED — do not try to install a low-beam bulb in the new lamp. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plugs.
- Refit the bumper, reconnect the battery, and test low beam, high beam, daytime running light and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Will these fit my 2016-2018 Pilot if it is not an Elite?
No. On 2016-2018 Pilot these lamps fit Elite only — the factory auto-dimming LED-low projector. Other 2016-2018 Pilot trims used a halogen housing with a different part number.
Will they fit a 2017-2020 Ridgeline that is not RTL-E or Black Edition?
No. Only RTL-E and Black Edition used this LED-low projector on those years.
Will they fit a 2022 Pilot or Passport?
No. These are for the years and trims listed above, through 2021.
Do I need new bulbs?
The low beam is sealed LED and is not a replaceable bulb. Reuse your 9005 high-beam bulbs, or add new ones. High-beam bulbs are not included.
Do I have to cut or splice wiring?
No. The lamps plug into the factory connectors and bolt to the factory points.