Black LED Headlights Pair without AFS for Mazda CX-5 (2017-2021)

Replace faded or cracked factory non-AFS LED lamps on your 2017-2021 CX-5 with this OE-style black-housing pair. Each lamp is a sealed LED assembly with an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. The low and high beams are sealed LED — there are no replaceable headlight bulbs in these housings.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing: black, clear lens, amber side marker, sealed LED projector
• Lighting: sealed LED (not a replaceable bulb)
• Plugs into the factory connectors (no splicing)

In the Box

• Driver-side LED headlight (KL2J-51-040)
• Passenger-side LED headlight (KL2J-51-031D)

Interchange References

Replaces the original assemblies commonly crossed with KL2J-51-040, KL2J-51-031D.

Installation: Mazda CX-5 (2017-2021)

On the 2017-2021 CX-5 (KF) the front bumper cover has to come off to reach the headlight bolts. Plan on a helper, trim tools and spare bumper clips. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.

1. Open the hood. Remove the fasteners across the top of the bumper and grille, the screws in each wheel well and the bolts underneath, then release each bumper corner from the fender.
2. With a helper, ease the cover forward, unplug any fog light or similar connectors and set the cover on a soft surface.
3. Unplug the headlight connectors, remove the mounting bolts and lift the lamp out. Support the housing — a sealed LED lamp is heavier than a halogen unit.
4. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plugs. Do not try to install a headlight bulb in the new lamp; the beams are sealed LED.
5. Refit the bumper, reconnect the battery, and test low beam, high beam, daytime running light and turn signal before you drive. Aim the beams after installation.

Frequently Asked Questions

Will these fit a CX-5 with AFS or adaptive headlights?
No. These are for 2017-2021 CX-5 with factory non-AFS LED lamps. AFS housings have a different part number and will not interchange.

Will they fit a halogen or HID CX-5, or a 2013-2016?
No. Use the 2013-2016 CX-5 halogen pair for that generation. Halogen and HID lamps on 2017-2021 are a different housing.

Do I need new bulbs?
No. The low and high beams are sealed LED and are not replaceable bulbs.

Do I have to cut or splice wiring?
No. The lamps plug into the factory connectors and bolt to the factory points.