Black LED Headlights Pair without AFS for Mazda CX-9 (2016-2021)
$344.95
Ir directamente a la información del producto
Black LED Headlights Pair without AFS for Mazda CX-9 (2016-2021)
$344.95
DS-TM52510L0B
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2016-2021 Mazda CX-9 with factory non-AFS LED lamps (TM52510L0B / TM52510K0B). They will not fit halogen, HID, or AFS / adaptive front lighting housings, and they will not fit 2022-2023 CX-9 unless your original lamps match these photos and part numbers. Confirm your lamps do not have the AFS motor and match these photos.
Replace faded or cracked factory non-AFS LED lamps on your 2016-2021 CX-9 with this OE-style black-housing pair. Each lamp is a sealed LED assembly with LED low and high beams and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. The low and high beams are sealed LED — there are no replaceable headlight bulbs in these housings.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2016-2021 | Mazda CX-9 | Factory non-AFS LED only. Not halogen, HID, AFS, or 2022-2023. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber side marker, sealed LED low and high beam
- Lighting: sealed LED (not a replaceable bulb)
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side LED headlight (TM52510L0B)
- Passenger-side LED headlight (TM52510K0B)
Interchange References
Replaces the original assemblies commonly crossed with TM52510L0B, TM52510K0B, MA2502148, MA2503148.
Installation: Mazda CX-9 (2016-2021)
On the 2016-2021 CX-9 the front bumper cover has to come off to reach the headlight bolts. Plan on a helper, trim tools and spare bumper clips. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the fasteners across the top of the bumper and grille, the screws in each wheel well and the bolts underneath, then release each bumper corner from the fender.
- With a helper, ease the cover forward, unplug any fog light or similar connectors and set the cover on a soft surface.
- Unplug the headlight connectors, remove the mounting bolts and lift the lamp out. Support the housing — a sealed LED lamp is heavier than a halogen unit.
- Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plugs. Do not try to install a headlight bulb in the new lamp; the low and high beams are sealed LED.
- Refit the bumper, reconnect the battery, and test low beam, high beam, daytime running light and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Will these fit a CX-9 with AFS or a 2022-2023 CX-9?
No. These are for 2016-2021 CX-9 with factory non-AFS LED lamps. We have not confirmed the same housing on 2022-2023.
Will they fit a halogen or HID CX-9?
No. Those are a different housing and will not interchange.
Do I need new bulbs?
No. The low and high beams are sealed LED and are not replaceable bulbs.
Do I have to cut or splice wiring?
No. The lamps plug into the factory connectors and bolt to the factory points.