Black LED Projector Headlights Pair for INFINITI G37 Sedan (2010-2013) / G25 Sedan (2011-2012) / Q40 (2015)

Update a 2010-2013 G37 sedan, a 2011-2012 G25 sedan, or a 2015 Q40 with a black projector pair and a built-in LED daytime running light. You get driver and passenger assemblies with a clear lens, black housing, and an amber side marker, plus included H7 high-beam bulbs and T20 turn-signal bulbs. The low beam uses a D2S HID bulb, which is not included — reuse your factory D2S bulbs or install new ones when you swap the lamps.

Fitment

Specs

• Sold as: a driver and passenger pair
• Style: black housing, clear lens, amber side marker, D2S HID low-beam projector, halogen high beam, LED daytime running light
• Lighting: D2S low beam (not included); H7 high-beam bulbs included; T20 turn-signal bulbs included; LED daytime running light
• DOT certified
• 12 V
• New aftermarket assemblies

In the Box

• Driver and passenger black LED projector headlights
• 2 H7 high-beam bulbs
• 2 T20 turn-signal bulbs

Interchange References

Replaces original-style G37, G25, and Q40 sedan headlights commonly crossed with 260601NC0A, 260601NC0C, 260101NC0A, and 260101NC0C.

Installation: INFINITI G37 sedan (2010-2013), G25 sedan (2011-2012), and Q40 (2015)

On these sedans the headlight sits in the front fascia opening, and some of the fasteners are easier to reach if you loosen the bumper cover or the inner fender liner. Professional installation and beam aiming are recommended, especially because the low beam is a D2S HID projector. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start. Allow the HID bulbs to cool if the lamps have been on.

1. Loosen the bumper cover or the inner fender liner so you can reach the headlight bolts.
2. Support the lamp, remove the bolts, and pull the assembly forward. Disconnect the factory harness.
3. Transfer your D2S low-beam HID bulb into the new projector, or install a new D2S bulb. Install the included H7 high-beam and T20 turn-signal bulbs.
4. Connect the new headlight, including the LED daytime running light plug, seat it in the opening, and reinstall the bolts. Repeat on the other side, then refasten the fascia or liner.
5. Reconnect the battery and check low beam, high beam, turn signals, and the LED daytime running light. Aim the headlights on a level surface before driving at night.

Frequently Asked Questions

Which vehicles does this pair fit?
INFINITI G37 sedan 4-door (2010-2013), G25 sedan 4-door (2011-2012), and Q40 sedan 4-door (2015). Compare your current housings with our photos before ordering.

Will it fit a G37 or Q60 coupe, or a 2014 sedan?
No. This pair is for the 4-door sedan only. It will not fit the coupe, and 2014 was not a listed year for this housing.

Are bulbs included?
H7 high-beam bulbs and T20 turn-signal bulbs are included. The low beam uses a D2S HID bulb, which is not included — reuse your factory D2S bulbs or install new ones.

Is the low beam LED?
No. Low beam is a D2S HID projector (bulb not included). High beam is halogen H7 (included). The daytime running light is LED.