Chrome Full LED Headlights Pair w/ LED Module for Cadillac Escalade Luxury Premium (2021-2024)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace hazy or damaged headlights on your 2021-2024 Cadillac Escalade Luxury or Premium Luxury (chrome bezel) with this new full LED pair. LED module included per the listing.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2021-2024 | Cadillac Escalade / Escalade ESV Luxury and Premium (chrome bezel) | Factory LED headlights |
Will NOT fit: Sport / Sport Platinum (black bezel); Escalade-V; 2015-2020 Escalade.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam, DRL, turn: built-in LED
- Bezel: Chrome
- LED module included (per listing)
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 85750329, 84950142, 84869549, 84884849, 84910937, 85067781, 85152295, 85619331, 86771960, 84869550, 84884850, 84910938, 84950143, 85000988, 85067782, 85152298, 85619333, 86771961. Partslink: GM2502527, GM2503527.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
Installation
- Open the hood and remove the 14 push pins on the upper fascia cover, then the eight 10 mm bolts along the top of the fascia and the 2 harness clips.
- Unplug the fog/sensor harness on the passenger side.
- Remove the 7 mm wheel-liner screws, the eight 10 mm bolts under the fascia and the push pin in front of each tire.
- Pry the fascia-to-fender clips at each corner, unclip the 2 tabs behind the grille and pull the fascia off with a helper.
- Remove the two upper 10 mm headlamp bolts and the side 10 mm bolt, slide the lamp forward, lift the red connector lock (CPA) and swing the lever to unplug.
- Install the new headlights in reverse order, test every function and check aim.
Steps compiled from the CURT 70111 install sheet for 2021+ Tahoe/Yukon/Escalade (fascia removal) and the DIY Master Tech 2021+ Escalade headlight replacement video. Professional installation and headlight aiming are recommended.
FAQs
Will these fit an Escalade Sport?
No. The listing photo shows Sport / Sport Platinum black-bezel lamps do not match.
Will these fit a 2020 Escalade?
No. The 2021 redesign uses a different lamp.
Will I need any coding?
It should be a plug-in swap when you replace the same factory LED headlight type. If a dash warning appears, a dealer or scan tool can clear it.
Do I need to remove the front bumper to replace these headlights?
Yes. The front fascia comes off to reach the three headlamp bolts.
What bulbs do these use?
None to buy for the headlights. Low and high beams are built-in LED.
Can I install LED or HID kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.