Chrome Halogen Headlight Set with Corner Lights and Bezels for Peterbilt 375 385 (1987-2008)

Refresh the front of a 375 or 385 with a complete chrome halogen set. You get driver and passenger rectangular headlights, matching amber corner lamps, chrome bezels, mounting frames, wiring, and bulbs, so you can replace a faded or incomplete lighting setup in one go. The lamps use included 9004 (HB1) headlight bulbs and 3157 corner-lamp bulbs, and the bezels mount to the hood around the finished assembly.

Fitment

Specs

• Sold as: a complete driver and passenger set
• Style: chrome bezels, clear rectangular halogen headlights, amber corner lamps
• Lighting: halogen low and high beam, 9004 (HB1) bulbs included; 3157 bulbs included for the corner lamps
• DOT certified
• 12 V
• Wiring harnesses and mounting hardware included
• New aftermarket assemblies

In the Box

• Driver and passenger halogen headlights
• Driver and passenger amber corner lights
• Driver and passenger chrome bezels
• 2 headlight mounting frames
• 2 corner-lamp holders
• 2 9004 (HB1) headlight bulbs
• 2 3157 corner-lamp bulbs
• Wiring harnesses
• Mounting hardware and aim adjusters

Interchange References

Replaces the original-style 375 and 385 lighting setup commonly crossed with chrome bezel 16-07043 (left and right).

Installation: Peterbilt 375 (1987-1996) and 385 (1995-2008)

On these trucks the chrome bezel mounts to the hood, not to the headlight itself. The headlight and corner lamp assemble onto a frame that bolts to the same hood opening. Professional installation and beam aiming are recommended, especially if the old bucket hardware is rusted or riveted. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Tilt the hood open and support it. Unplug the factory headlight and corner-lamp connectors.
2. Remove the chrome bezel from the hood, then unbolt and lift out the old headlight, corner lamp, and bucket or frame. Do not force frozen or riveted hardware — have a shop extract a broken stud rather than crack the hood.
3. Install the included 9004 bulb in each new headlight and secure it with the collar. Attach each corner-lamp holder to the mounting frame (they are side-specific), then fit the amber corner lamp to the holder.
4. Fasten each headlight to its mounting frame with the long adjuster screws, connect the included harnesses, and bolt the frames to the hood opening.
5. Install the chrome bezels directly on the hood around the finished lamps. Reconnect the battery, and test low beam, high beam, and the amber corner lamps. Aim the headlights with the adjuster screws on a level surface before driving at night.

Frequently Asked Questions

Which trucks does this set fit?
Peterbilt 375 (1987-1996) and 385 (1995-2008) with this rectangular halogen headlight, amber corner lamp, and chrome bezel. Compare your current opening with our photos before ordering.

Will it fit a 377, 378, or 379?
No. Do not order this set for 377, 378, 379, or for trucks that use round headlights or a different bezel.

Is this just a pair of headlights?
No. This is a complete set: driver and passenger headlights, amber corner lamps, chrome bezels, mounting frames, wiring harnesses, hardware, and bulbs.

Are bulbs included?
Yes. Each set includes two 9004 (HB1) headlight bulbs and two 3157 bulbs for the corner lamps.

How does the bezel attach?
The chrome bezels mount to the hood around the lamps. They do not clip onto the headlight or corner-lamp housings themselves.