Chrome Halogen Headlights Pair for Infiniti EX35, EX37 and QX50 (2008-2017)
$550.95
Ir directamente a la información del producto
Chrome Halogen Headlights Pair for Infiniti EX35, EX37 and QX50 (2008-2017)
$550.95
DS-260601BA1A
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit 2008-2012 Infiniti EX35, 2013 EX37, and 2014-2017 QX50 with factory halogen lamps (J50). This is a driver and passenger pair — two lamps. They do not fit HID or AFS headlights (we carry that pair here). They do not fit the 2019-up QX50, which is a different vehicle.
Replace faded or cracked factory halogen lamps on your EX35, EX37 or QX50 with this chrome-housing pair. Each lamp bolts to the factory points and plugs into the factory connectors, with no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2008-2012 | Infiniti EX35 | J50, factory halogen headlights. Not HID or AFS. |
| 2013 | Infiniti EX37 | J50, factory halogen headlights. Not HID or AFS. |
| 2014-2017 | Infiniti QX50 | J50 (renamed EX), factory halogen headlights. Not HID or AFS. Not the 2019-up QX50. |
Specs
- Sold as: driver and passenger pair (two lamps)
- Housing: chrome, clear lens, amber reflector
- Low beam: H11 halogen
- High beam: H9 halogen
- Bulbs included, already installed
- DOT compliant
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight (260601BA1A style)
- Passenger-side halogen headlight (260101BA1A style)
- H11 and H9 bulbs (already installed)
Interchange References
Replaces the original assemblies commonly crossed with 260601BA1A, 260101BA1A, 260601BA0A, 260101BA0A, IN2503164, IN2502164.
Installation: Infiniti EX35, EX37 and QX50 (2008-2017)
On the J50 EX35, EX37 and QX50 the front bumper cover is typically loosened or removed so you can reach the side headlight bolts. The upper bolts are visible in the engine bay. Turn the lights and ignition off before you start.
- Open the hood. Remove the upper bumper-cover fasteners and the clips and screws at each wheel-arch corner and along the lower edge.
- Release the bumper cover at the fenders, unplug any bumper lamps or sensors as equipped, and set the cover aside or let it hang if you only need side-bolt clearance.
- Remove the headlight mounting bolts, slide the lamp forward and unplug the connectors.
- Plug the new lamp in, seat the locating points, and start all bolts by hand before tightening them evenly.
- Refit the bumper cover. Test low beam, high beam and the turn signal, then aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
2008-2012 Infiniti EX35, 2013 Infiniti EX37, and 2014-2017 Infiniti QX50 with factory halogen headlights (J50). They do not fit HID or AFS lamps, and they do not fit the 2019-up QX50. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, two lamps.
Are bulbs included?
Yes. The H11 low-beam and H9 high-beam bulbs come already installed.
Will these fit HID or AFS Infiniti headlights?
No. These are halogen housings only. We carry the HID with AFS pair for the same 2008-2017 EX35, EX37 and QX50 separately.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2008-2017 EX35, EX37 or QX50?
The front bumper cover is typically loosened or removed so you can reach the side bolts. Remove the lamp, install the new one, refit the cover and aim the beams afterward.