Chrome Halogen Projector Headlights Pair for Toyota Highlander (2014-2016)
$205.95
Ir directamente a la información del producto
Chrome Halogen Projector Headlights Pair for Toyota Highlander (2014-2016)
$205.95
DS-296640875164
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2014-2016 Toyota Highlander and Highlander Hybrid (LE, LE Plus, XLE, Limited) with factory halogen projector headlights. They will not fit the 2011-2013 Highlander or the 2017-2019 refreshed Highlander; those are different lamps. If you have a Limited Platinum, contact us before ordering. Bulbs and sockets are not included, so move your factory bulbs over or buy new ones.
Bring the shine back to your third-generation Highlander. This chrome-housing projector pair replaces yellowed, hazy or cracked 2014-2016 headlights with crisp clear lenses, a halogen projector low beam and the bold amber corner strip. Each lamp bolts to the factory mounting points and plugs into the factory connectors, with no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2014-2016 | Toyota Highlander | LE, LE Plus, XLE, Limited, Hybrid LE, Hybrid XLE and Hybrid Limited (2.7L and 3.5L) with factory halogen projector headlights. |
Specs
- Sold as: driver and passenger pair
- Housing: chrome, clear lens, amber corner strip
- Low beam: halogen projector
- Bulbs and sockets not included (reuse your factory bulbs)
- Mounts to the factory points and plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen projector headlight assembly
- Passenger-side halogen projector headlight assembly
Installation: Toyota Highlander (2014-2016)
On the 2014-2016 Highlander the headlight bolts are reached after the front bumper cover comes off. Allow a couple of hours and get a helper to hold the bumper. Turn the lights and ignition off before you start.
- Remove the upper radiator support cover and its clips, the engine splash shield fasteners and the fender liner clips at the front of each wheel well.
- Release the bumper cover at each fender, unplug the fog lights and pull the cover forward off the car.
- Remove the two upper headlight bolts and the bolt near the fender, release the retaining tab and pull the lamp forward to unplug its connectors.
- Move your bulbs and sockets to the new lamp, plug it in, seat the tab and tighten the bolts evenly.
- Refit the bumper cover and every clip, test low, high, parking and turn signal functions, then aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
2014-2016 Toyota Highlander and Highlander Hybrid LE, LE Plus, XLE and Limited with factory halogen projector headlights. They do not fit 2011-2013 or 2017-2019. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Are bulbs included?
No. Bulbs and sockets are not included. Move your factory ones to the new lamps.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2014-2016 Toyota Highlander?
The front bumper cover has to come off. Then remove the two upper bolts and the side bolt, release the retaining tab, unplug the lamp, move your bulbs over and install the new one. Aim the beams when you are done.