Chrome LED Headlights Pair w/ LED DRL for Ford Explorer XLT Limited (2020-2024)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace hazy or damaged factory LED headlights on your 2020-2024 Ford Explorer XLT or Limited with this new LED pair with LED DRL. Bulbs included; LED module not included, so reuse yours.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2020-2024 | Ford Explorer XLT / Limited with factory LED headlights and LED DRL | Factory LED headlights |
Will NOT fit: Base Explorer (no LED DRL); Platinum; cars with adaptive headlights; 2025+ Explorer.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam, DRL, turn: built-in LED
- DRL: LED
- Housing: Chrome
- LED control module: NOT included (per listing); reuse the modules from your factory headlights
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: MB5Z13008S, MB5Z-13008-AW, LB5Z-13008-AM, LB5Z-13008-BC, LB5Z-13008-DA, LB5Z-13008-V, MB5Z-13008-AV, LB5Z-13008-AL, LB5Z-13008-BB, LB5Z-13008-CZ, LB5Z-13008-U. Partslink: FO2503397, FO2502397.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
Installation
- Disconnect the battery. Remove the front wheels (or turn them fully) for access.
- Remove the body-side front shield bolts and the splash-shield push pins in each wheel well, and unplug the side repeater lamp connector.
- Remove the bumper-to-fender push pin and bolts at each side, the radiator sight shield push pins on top, and the upper bumper cover bolts; unplug the bumper harness connector.
- With a helper, pull the front bumper cover forward and off.
- Remove the 5 headlamp bolts, release the locking tab, pull the lamp forward and unplug it.
- Move your LED control modules to the new lamps if required, install the new lamps (bolts 28 lb-in / 3.2 Nm per Ford), refit the bumper cover, test every function and aim the headlights.
Steps compiled from the Ford workshop headlamp procedure posted on FOExplorer.com, the Ford Performance M-17750-A Explorer bumper-cover removal sheet and the EngineNeeds 2020 Explorer headlight guide. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a base Explorer?
No. The listing photo shows they match XLT/Limited with LED DRL, not the base model; Platinum is also excluded.
Will these fit an Explorer with adaptive headlights?
No. These are without adaptive (AFS) function.
Do I need to remove the front bumper to replace these headlights?
Yes. Ford's procedure removes the front bumper cover to reach the 5 headlamp bolts.
What bulbs do these use?
None to buy for the headlights. Low and high beams are built-in LED.
Can I install LED or HID kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.