Chrome Quad Halogen Headlights Pair with LED DRL for Chrysler Pacifica Hybrid (2017-2020)
$322.95
Ir directamente a la información del producto
Chrome Quad Halogen Headlights Pair with LED DRL for Chrysler Pacifica Hybrid (2017-2020)
$322.95
DS-68342193AE
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit 2017-2020 Chrysler Pacifica Hybrid models with factory chrome-bezel quad halogen lamps and LED daytime running lights (68342193AE / 68342192AE). This is a driver and passenger pair — two lamps. They do not fit gas (non-hybrid) Pacifica halogen lamps, HID or xenon models, lamps without LED DRL, or 2021-up Pacifica. For the gas-model chrome-bezel halogen pair, use our halogen headlights pair with chrome bezel for Chrysler Pacifica (2017-2020).
Replace yellowed or cracked factory lamps on your 2017-2020 Pacifica Hybrid with this chrome-bezel quad halogen pair. Each lamp has an LED daytime running light, comes with halogen bulbs, bolts to the factory points, and plugs into the factory connectors, with no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2017-2020 | Chrysler Pacifica Hybrid | Factory chrome-bezel quad halogen with LED DRL (68342193AE / 68342192AE). Not gas/non-hybrid halogen, not HID, not without LED DRL, not 2021-up. |
Specs
- Sold as: driver and passenger pair (two lamps)
- Housing: chrome bezel, clear lens
- Low and high beam: halogen (bulbs included)
- Daytime running light: LED
- CAPA certified
- DOT compliant
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side chrome-bezel halogen headlight (68342193AE style)
- Passenger-side chrome-bezel halogen headlight (68342192AE style)
- Halogen bulbs (already installed)
Interchange References
Replaces the original assemblies commonly crossed with 68342193AE, 68342192AE, 68342193AA, 68342193AB, 68342193AC, 68342193AD, 68342192AA, 68342192AB, 68342192AC, 68342192AD, CH2502318, CH2503318.
Installation: Chrysler Pacifica Hybrid (2017-2020)
On the 2017-2020 Pacifica Hybrid the front bumper cover comes off so you can reach the headlight bolts. The procedure is the same on both sides. Turn the lights and ignition off before you start.
- Open the hood. Remove the upper bumper-cover and grille fasteners, the screws along the lower edge, and the clips and screws in each wheel arch and at the fender corners.
- Release the bumper cover at the fenders, unplug any bumper lamps or sensors as equipped, and set the cover aside.
- Disconnect the factory connector. Remove the headlight mounting bolts and slide the lamp forward.
- Plug the new lamp in, seat the locating points, and start all bolts by hand before tightening them evenly. Check for an even gap to the fender and hood.
- Refit the bumper cover. Test low beam, high beam, the LED daytime running light and the turn signal, then aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
2017-2020 Chrysler Pacifica Hybrid models with factory chrome-bezel quad halogen lamps and LED daytime running lights (68342193AE / 68342192AE). They do not fit gas (non-hybrid) Pacifica halogen lamps, HID or xenon models, lamps without LED DRL, or 2021-up Pacifica. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, two lamps.
Will these fit a gas (non-hybrid) 2017-2020 Pacifica?
No. The gas-model chrome-bezel halogen lamps use a different part number. Use our halogen headlights pair with chrome bezel for Chrysler Pacifica (2017-2020).
What bulb sizes do these headlights use?
Halogen bulbs are included. Published low-beam sizes for these Pacifica halogen lamps are not consistent across sources, so we do not list a size here. Match the bulbs in your current lamps if you replace them. The daytime running light is LED.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2017-2020 Pacifica Hybrid?
The front bumper cover comes off so you can reach the headlight bolts. Disconnect the connector, swap the lamp, refit the cover and aim the beams afterward.