GENSSI hero — clear halogen tail lights pair for Ford Super Duty (2017-2019) on white

Clear Lens Halogen Tail Lights Pair w/o Blind Spot for Ford Super Duty (2017-2019)

$120.95
Ir directamente a la información del producto
GENSSI hero — clear halogen tail lights pair for Ford Super Duty (2017-2019) on white

Clear Lens Halogen Tail Lights Pair w/o Blind Spot for Ford Super Duty (2017-2019)

$120.95
DS-F250-F350-TAIL-CLEAR-HALOGEN-2017-2019

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A red factory lens leaves a 2017-2019 Super Duty looking plain on the bedside, and this clear halogen pair opens the lens so the 3157 bulbs read through a chrome housing. GENSSI's set is the lamp for trucks without blind spot, and the factory sockets twist in with no splicing.

Important Fitment Note: Halogen lamps without blind spot only. A truck with factory LED tail lamps, or with a blind-spot sensor in the lamp, uses a different housing. A 2020-2022 Super Duty uses a different housing.

Fitment

YEAR MAKE / MODEL FITS
2017-2019 Ford / F-250, F-350, F-450 Super Duty, halogen, no blind spot Yes
2017-2019 Ford / Super Duty, factory LED or with blind spot No
2020-2022 Ford / Super Duty No

Specs

  • Style: Chrome housing with a clear lens. Halogen, without a blind-spot sensor
  • Bulbs: Incandescent. Bulbs and sockets are not included. Brake, turn, and park use 3157 bulbs. Reverse uses a 7440
  • Sold as: Pair — left and right clear halogen tail lights. Bulbs and sockets are not included
  • Fit: 2017-2019 Ford F-250, F-350, and F-450 Super Duty with factory halogen lamps and no blind-spot sensor. Factory sockets, no splicing

Interchange

HC3Z-13405-B, HC3Z-13404-B, HC3Z-13405-C, HC3Z-13404-C, HC3Z-13405-E, HC3Z-13404-E

What's included

  • 1x Driver (left) clear halogen tail light
  • 1x Passenger (right) clear halogen tail light

Installation — Ford Super Duty halogen (2017-2019)

  1. Confirm halogen tail lamps with no blind-spot sensor in the housing. A factory LED lamp, or a lamp with blind spot, is a different part. A 2020-2022 Super Duty uses a different housing.
  2. Lower the tailgate. The two bolts on each lamp take an 8mm socket.
  3. Remove both 8mm bolts. Pull the lamp toward the side of the bed to release the two guide pins. If a pin stays in the old lamp, press it back into the bed before the new lamp goes on.
  4. Unplug the three sockets. The sockets and bulbs are not in the box. Brake, turn, and park use 3157 bulbs. Reverse uses a 7440.
  5. Lock those sockets into the new housing in the same chambers.
  6. Line the guide pins up, push the lamp into the bedside, and snug the two 8mm bolts.
  7. Check park, brake, both turn signals, and reverse, then repeat on the other side and close the tailgate.

Buyer FAQ

Does a blind-spot truck fit? No. This pair is the halogen lamp without a blind-spot sensor. A blind-spot lamp and a factory LED lamp are different housings.

Are the bulbs included? No. Move the factory sockets. Brake, turn, and park use 3157 bulbs. Reverse uses a 7440.

Which part numbers does this replace? Left replaces HC3Z-13405-B. Right replaces HC3Z-13404-B.

También te puede interesar