Full LED Projector Headlights Pair with LED DRL for Nissan Altima 2.5 (2019-2022)
$330.95
Ir directamente a la información del producto
Full LED Projector Headlights Pair with LED DRL for Nissan Altima 2.5 (2019-2022)
$330.95
DS-260606CA5B
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2019-2022 Nissan Altima 2.5 sedan (SV, SR, SR Midnight Edition, SL and Platinum) that came with factory full LED projector headlights and an LED daytime running light. They will not fit cars with factory halogen headlights, the 2.0 VC-Turbo models, or the 2023 and newer refreshed Altima. All LED light sources and modules are already installed.
Bring back the sharp chevron look of your sixth-generation Altima. This full LED pair replaces faded, cracked or failed headlights with crisp LED projector low and high beams and the signature LED running light, all built in and ready to go. Each lamp plugs into the factory connector, with no splicing and no bulbs to buy.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2019-2022 | Nissan Altima | 2.5L sedan in SV, SR, SR Midnight Edition, SL and Platinum trim with factory full LED projector headlights and LED DRL. |
Specs
- Sold as: driver and passenger pair
- Low and high beam: LED projector, built in
- Daytime running / parking light: LED, built in
- Side marker: LED, amber reflector
- Color temperature: about 5000K (cool white)
- DOT compliant
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side full LED headlight assembly
- Passenger-side full LED headlight assembly
- LED light sources and control modules (pre-installed)
Interchange References
Replaces the original assemblies commonly crossed with 26060-6CA5B, 26010-6CA5B, 26060-6CA5A, 26010-6CA5A, NI2502266, NI2503266.
Installation: Nissan Altima (2019-2022)
On the 2019-2022 Altima the headlight bolts are hidden behind the front bumper cover, so it has to come off. Have a helper, trim tools and painter's tape ready. Turn off the lights and ignition and disconnect the negative battery cable first.
- Tape the bumper, fender and lamp edges. Remove the clips across the upper radiator cover, then the wheel-liner fasteners and the screws and clips under the bumper.
- Release each bumper corner, support the cover, and unplug any fog light, sensor or camera connectors before setting it aside.
- Remove the headlight mounting bolts, support the housing, and unlock the electrical connector without pulling on the wires.
- Check that the new lamp's mounts and connector match, plug it in, seat it on the locating pins and snug the bolts.
- Reconnect everything on the bumper, refit every fastener, reconnect the battery, test all light functions and aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
2019-2022 Nissan Altima 2.5 sedans (SV, SR, SR Midnight Edition, SL and Platinum) with factory full LED headlights. They do not fit halogen-headlight cars, 2.0 VC-Turbo models, or 2023+ Altimas. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Do I need to buy bulbs?
No. The LED low beam, high beam, running light and marker are all built in and pre-installed.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2019-2022 Nissan Altima 2.5?
Remove the front bumper cover, unbolt the headlight, unplug its single connector and plug in the new lamp. All LEDs are built in, so there are no bulbs to transfer. Aim the beams afterward.