Glass Lens Headlights & Corners Pair for Toyota 4Runner (1992-1995)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Second-gen 4Runner sealed-look lamps go dim and dated—glass-lens crystal housings with matching corners sharpen the nose and throw a cleaner H4 beam. GENSSI's 1992-1995 Toyota 4Runner kit includes the adapters and bulbs for a direct composite-style swap.
Important Fitment Note: Fits 1992-1995 Toyota 4Runner composite/replaceable-bulb headlight openings. Does not replace sealed-beam buckets on earlier trucks without conversion.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 1992-1995 | Toyota / 4Runner | Yes |
Specs
- Style: Crystal chrome housing with glass lens and corner lights
- Bulbs: H4 low/high and 194 corner — H4 bulbs and 9004-to-H4 adapters included
- Sold as: Headlight and corner kit with H4 bulbs and adapters
- Fit: Direct replacement, plugs into factory connectors
Interchange
81150-35100, 81110-35100, 81620-35201, 81610-35201, TO2502116, TO2503116, TO2520147, TO2521147
What's included
- 1x Driver headlight
- 1x Passenger headlight
- 1x Driver corner
- 1x Passenger corner
- 2x H4 bulbs
- 2x 9004-to-H4 adapters
Installation — Toyota 4Runner (1992-1995)
- Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable. Confirm the truck uses composite replaceable-bulb headlights—not sealed beams.
- Remove the side turn-signal/marker screws, pull the lamps out, and unplug the sockets.
- Release the grille clips and remove the grille (have spare clips ready—factory clips often break).
- Remove the headlight mounting bolts (side bolts plus top and bottom fasteners), pull the assembly forward, and disconnect the harness.
- Install the new glass-lens housings and corners. Use the included 9004-to-H4 adapters and H4 bulbs where required. Do not touch halogen glass.
- Reconnect harnesses, test the lights, snug the bolts, then refit the grille and side markers. Reconnect the battery and aim the beams.
Buyer FAQ
Sealed-beam 4Runner fit? No. This kit is for 1992-1995 composite 4Runner headlights that use replaceable bulbs—not sealed-beam buckets.
What's included? Headlight pair, corner lights, Super White H4 bulbs, and 9004-to-H4 correction adapters.
Install steps? Remove the side markers and grille, unbolt the housings, plug in the adapters/bulbs, and reassemble.