Halogen Headlights Pair for Toyota Tundra Regular and Access Cab (2000-2004)

Give a first-generation Regular Cab or Access Cab Tundra a clean factory look again. This original-style halogen pair replaces tired or hazy headlights on 2000-2004 Regular Cab and Access Cab trucks with clear-lens assemblies that use the factory H4 bulb and the factory connector. Each lamp is DOT and SAE compliant. This is a direct-fit pair — no splicing.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing / style: original-style housing, clear lens
• Lighting: halogen, with H4 bulbs included
• DOT and SAE compliant
• New aftermarket assemblies, designed to replace the factory halogen units

Bulb size: H4 (included).

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly
• H4 halogen bulbs

Interchange References

Replaces the original halogen housings used under 81150-0C010 / 811500C010 (driver) and 81110-0C010 / 811100C010 (passenger), and Partslink TO2502129 / TO2503129. This is not the Sequoia / Tundra Double Cab housing (81150-0C020 / TO2502144).

Installation: Toyota Tundra Regular Cab and Access Cab (2000-2004)

On the 2000-2004 Regular Cab and Access Cab Tundra, the parking / signal lamp and the grille often come off so you can reach the headlight fasteners. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Open the hood. Remove the parking / signal lamp beside the headlight, then remove the grille and set both aside.
2. Remove the fasteners that hold the headlight. Pull the assembly forward and unplug the factory connector. Do not pull on the wiring.
3. Install the included H4 bulbs in the new housings. Connect the factory-style connector, seat each assembly, and start the fasteners. Repeat on the other side.
4. Reinstall the grille and parking / signal lamp, reconnect the battery, and test low beam and high beam. Aim the lamps on a level surface before driving at night.

Frequently Asked Questions

Which vehicles do these headlights fit?
2000-2004 Toyota Tundra Regular Cab and Access Cab only. They will not fit 2004 Tundra Double Cab or 2001-2004 Sequoia, which use a different housing. Compare your current lamps with our photos before ordering.

Will they fit a 2004 Tundra Double Cab or a Sequoia?
No. Double Cab Tundra (2004) and 2001-2004 Sequoia use a different assembly. This pair is the Regular Cab and Access Cab lamp only.

Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Do they include bulbs?
Yes. H4 halogen bulbs are included for both assemblies.

How are they installed on a 2000-2004 Tundra Regular or Access Cab?
On this generation, the parking / signal lamp and the grille often come off first so you can reach the headlight fasteners. Unplug the harness, install the new lamp with the included H4 bulbs, reconnect, reinstall the grille and parking lamp, and aim the lamps before nighttime driving.