LED Headlights Pair with Animation for Chevrolet Tahoe and Suburban (2025-2026)

Replace faded or cracked factory LED lamps on your 2025-2026 Tahoe or Suburban with this animated pair. Each lamp has sealed LED low and high beams, an LED daytime running light and animated lighting, includes the LED module, bolts to the factory points, and plugs into the factory connectors, with no splicing.

Fitment

Specs

• Sold as: driver and passenger pair (two lamps)
• Housing: black, clear lens
• Low and high beam: sealed LED (included)
• Daytime running light and turn signal: LED, with animation
• LED module included
• DOT and SAE compliant
• Plugs into the factory connectors (no splicing)

In the Box

• Driver-side LED headlight with animation (85717174 style)
• Passenger-side LED headlight with animation (85717175 style)
• LED modules (already installed)

Interchange References

Replaces the original assemblies commonly crossed with 85717174, 85717175, 85066275, 85673833, 85736759, 85788480, 85066276, 85673834, 85736760, 85788481, 85820557, 85842694, 85864904.

Installation: Chevrolet Tahoe and Suburban (2025-2026)

On the 2025-2026 Tahoe and Suburban the grille and front bumper cover come off so you can reach the headlight bolts. The procedure is the same on both sides and on both models. Turn the lights and ignition off before you start.

1. Open the hood. Remove the grille and the upper bumper-cover fasteners, the screws along the lower edge, and the clips and screws in each wheel arch and at the fender corners.
2. Release the bumper cover at the fenders, unplug any bumper lamps, sensors or camera connectors as equipped, and set the cover aside.
3. Disconnect the factory connectors. Remove the headlight mounting bolts and slide the lamp forward.
4. Plug the new lamp in, seat the locating points, and start all bolts by hand before tightening them evenly. Check for an even gap to the fender, grille and hood.
5. Refit the bumper cover and grille. Test low beam, high beam, the daytime running light, the turn signal and the animation, then aim the beams.

Frequently Asked Questions

Which vehicles do these headlights fit?
2025-2026 Chevrolet Tahoe and Suburban models with factory LED headlights that have animated lighting (85717174 / 85717175). They do not fit lamps without animation or 2021-2024 Tahoe and Suburban lamps. Compare your current lamps with our photos before ordering.

Is this a pair or a single lamp?
This is a complete driver and passenger pair, two lamps.

Will these fit 2025-2026 Tahoe or Suburban lamps without animation?
No. Those use a different housing. Use our full LED headlights pair without animation for Chevy Tahoe and Suburban (2025-2026).

Are bulbs included?
Low beam, high beam, the daytime running light and the animated turn signal are sealed LEDs and come already installed, along with the LED module.

Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.

How are they installed on a 2025-2026 Tahoe or Suburban?
The grille and front bumper cover come off so you can reach the headlight bolts. Disconnect the connectors, install the new lamp, refit the cover and grille, test the animation, and aim the beams afterward.