Red Clear Tail Lights Pair w/ LED Bulbs for Toyota Tacoma (2001-2004)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
The 2001-2004 Tacoma's amber-over-red lenses look dated from a truck length back, and this red-and-clear pair cleans that rear up while the LED turn and reverse bulbs come on sharper than the factory bulbs. GENSSI's set is a left and right assembly for that facelift Tacoma, not a 1995-2000 lamp and not a full-LED housing, and it bolts on with the four factory screws.
Important Fitment Note: 2001-2004 only. The 1995-2000 Tacoma uses a different tail lamp. If the brake section goes dark when the parking lights are on, the spade terminals in the new plug are in the wrong order. Move them to match the factory plug. Do not cut the wires.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2001-2004 | Toyota / Tacoma, regular cab, Xtracab, and Double Cab | Yes |
| 1995-2000 | Toyota / Tacoma | No |
Specs
- Style: Black-edged housing with a clear upper lens and a red lower lens; polycarbonate lens with UV protection and high impact resistance
- Bulbs: Brake and park is an incandescent 1157, two included. Turn is an LED 1156, two included. Reverse is an LED 921 wedge, two included. This is not a full-LED housing. The harness plugs into the factory connector
- Sold as: Pair — left and right tail light assemblies, with 1157, 1156 LED, and 921 LED bulbs
- Fit: Direct replacement for every 2001-2004 Toyota Tacoma, regular cab, Xtracab, and Double Cab, including PreRunner and 4x4. Harness plugs into the factory connector
Interchange
81560-04060, 81550-04060, TO2800139, TO2801139
What's included
- 1x Driver (left) red and clear tail light assembly
- 1x Passenger (right) red and clear tail light assembly
- 2x 1157 clear incandescent bulbs
- 2x 1156 LED turn bulbs
- 2x 921 LED reverse bulbs
Installation — Toyota Tacoma (2001-2004)
- Open the tailgate. Each lamp is held by four Phillips screws recessed in the face of the lens. Remove them with a Phillips screwdriver.
- Pull the lamp straight out of the bed side. Press the tab on the harness plug and unplug it. Do not pull on the wires.
- The body clips sometimes stay in the bed. Pry them out with a flat screwdriver, pushing down on the top of the clip and up on the bottom, and press them into the new housing if they did not come already seated.
- The back of the housing labels the sockets. Push the included clear 1157 into the brake and park socket, the included LED 1156 into the turn socket, and the included LED 921 into the reverse socket.
- Plug the harness into the factory connector. Before the screws go back, check running lights, brake, both turn signals, and reverse. If the brake section goes dark when the parking lights are on, the new plug's spade terminals are in the wrong cavities. Release each terminal, seat it in the same order as the factory plug, and test again. Do not cut the wires.
- Guide the clips into the bed side and start the four Phillips screws. Snug them. Do not strip the plastic.
Buyer FAQ
Is this a full LED tail light? No. The housing is a red and clear lens. Brake and park use the included incandescent 1157. Turn uses the included LED 1156, and reverse uses the included LED 921.
Will these fit a 1995-2000 Tacoma? No. The 1995-2000 lamp is a different shape. This pair is 2001-2004 only, including regular cab, Xtracab, Double Cab, PreRunner, and 4x4.
What is in the box, and which part numbers does it replace? One driver-side housing, one passenger-side housing, two clear 1157 bulbs, two LED 1156 turn bulbs, and two LED 921 reverse bulbs. It replaces 81560-04060 on the left and 81550-04060 on the right.