Red Smoke Halogen Tail Lights Pair for Dodge Ram 1500 (2007-2008) / Ram 2500 3500 (2007-2009)
$99.95
Ir directamente a la información del producto
Red Smoke Halogen Tail Lights Pair for Dodge Ram 1500 (2007-2008) / Ram 2500 3500 (2007-2009)
$99.95
DS-55277303AA
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These tail lights fit Dodge Ram 1500 (2007-2008) and Dodge Ram 2500 and 3500 (2007-2009) only. They will not fit 2002-2006 Ram, 2009-up Ram 1500, or 2010-up Ram 2500 and 3500. Compare your current housings with our photos before ordering.
Give a mid-cycle third-generation Ram a darker factory-style look with this red smoke halogen pair. You get driver and passenger assemblies with the stacked dual-circle layout and a smoked red lens over a clear-tinted reverse section. Reuse your existing halogen bulbs — bulbs are not included. The housings use the factory mounting points and factory-style connectors.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2007-2008 | Dodge Ram 1500 | Mid-cycle dual-circle halogen housing. Red smoke lens |
| 2007-2009 | Dodge Ram 2500 | Same housing |
| 2007-2009 | Dodge Ram 3500 | Same housing |
Specs
- Sold as: a driver and passenger pair
- Style: black housing, red smoke lens
- Lighting: halogen tail, brake, turn, and reverse; bulbs not included
- DOT certified
- 12 V
- New aftermarket assemblies
- OEM cross-reference: 55277303AA, 55277302AA, 55277303AB, 55277302AB, 55277303AC, 55277302AC, CH2800165, CH2801165
What’s in the box
- Driver tail light assembly
- Passenger tail light assembly
Installation
- Open the tailgate so you can reach the bolts behind each bedside lamp.
- Remove the two bolts that hold the assembly to the bedside.
- Pull the housing straight back off the bed, then unplug the factory connector and twist out the bulb sockets.
- Transfer the bulbs and sockets into the new housing, seat it on the factory mounting points, reconnect, and tighten the bolts.
- Repeat on the other side, then check tail, brake, turn, and reverse functions before closing the tailgate.
A do-it-yourself installer can usually finish both sides in about 30-45 minutes with basic hand tools. Always disconnect the negative battery cable before you start and torque fasteners to the factory specification.