Smoke Amber Corner Halogen Headlights Pair for Ford F-250 F-350 F-450 F-550 Super Duty (2008-2010)

Smoke Amber Corner Halogen Headlights Pair for Ford F-250 F-350 F-450 F-550 Super Duty (2008-2010). New driver and passenger replacement assemblies. Match the original housing and factory lighting equipment before ordering.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing/style: Smoke Amber Corner
• Lighting: Halogen
• High/low beam 9008 (H13); signal 3157A. Bulbs not included.

Bulb sizes: 9008 | 3157A

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly

Interchange References

7C3Z13008BA, 7C3Z13008AA, 8C3Z13008A, FO2503243, FO2503285, FO2502243

Installation: Ford F-250 F-350 F-450 F-550 Super Duty (2008-2010)

Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.

1. Remove the two visible upper 10 mm headlight bolts, the concealed 7 mm fastener and lower 10 mm mounting bolt. Keep the Super Duty fender-side clips aligned as you pull the lamp straight forward.
2. Release the two fender-side clips and twist out the headlight and signal sockets. Transfer compatible 9008/H13 and signal bulbs without touching their glass.
3. Seat the fender-side tabs/clips and start all mounting bolts before tightening. Refit the fasteners, test both beams and signals and have the beam aim checked.

Frequently Asked Questions

Which vehicles and factory lighting equipment are compatible?
2008-2010 Ford F-250 Super Duty (Not sealed-beam headlights); 2008-2010 Ford F-350 Super Duty (Not sealed-beam headlights); 2008-2010 Ford F-450 Super Duty (Not sealed-beam headlights); 2008-2010 Ford F-550 Super Duty (Not sealed-beam headlights). Not compatible with sealed-beam headlights. Match the original replaceable-bulb composite housings. Bulbs are not included.

Which bulbs are used and included?
High/low beam 9008 (H13); signal 3157A. Bulbs not included.

What access is needed for installation?
The upper, concealed and lower fasteners are removed before releasing the two fender clips. Professional installation and beam aiming are recommended.