GENSSI hero — smoke tail lights pair for Jeep Wrangler YJ and TJ (1987-2006) on white

Smoke Tail Lights Pair w/ Bulbs for Jeep Wrangler YJ/TJ (1987-2006)

$139.95
Ir directamente a la información del producto
GENSSI hero — smoke tail lights pair for Jeep Wrangler YJ and TJ (1987-2006) on white

Smoke Tail Lights Pair w/ Bulbs for Jeep Wrangler YJ/TJ (1987-2006)

$139.95
DS-YJ-TJ-TAIL-SMOKE-PAIR-1987-2006

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A red factory lens leaves a YJ or TJ looking plain from the rear corner, and this smoke pair darkens that lamp so the brake still reads through the lens at night. GENSSI's set is a left and right assembly for the 1987-1995 YJ and the 1997-2006 TJ, with the YJ adapters in the box, and it plugs in with no splicing.

Important Fitment Note: A TJ or TJ Unlimited (1997-2006) plugs into the factory connector. A 1987-1990 YJ uses the pre-facelift adapters in the box, and a 1991-1995 YJ uses the facelift adapters. There was no 1996 Wrangler. JK and JL use a different lamp.

Fitment

YEAR MAKE / MODEL FITS
1987-1990 Jeep / Wrangler YJ, pre-facelift Yes
1991-1995 Jeep / Wrangler YJ, facelift Yes
1997-2006 Jeep / Wrangler TJ and Unlimited Yes
2007-2018 Jeep / Wrangler JK No
2018-2026 Jeep / Wrangler JL No

Specs

  • Style: Black housing with a smoked prismatic lens
  • Bulbs: Incandescent. Two red 1157 bulbs and two clear 1156 reverse bulbs are in the box. The lamp connector plugs into a TJ. Four YJ adapter harnesses are included
  • Sold as: Pair — left and right smoke tail lights, bulbs, six bolts with lock washers, and four YJ adapter harnesses
  • Fit: 1987-1995 Wrangler YJ and 1997-2006 Wrangler TJ, including 2004-2006 Unlimited. YJ uses the included adapters. No splicing

Interchange

56018649, 56018649AD, 56016721, 56006517, 56018648, 56018648AD, 56016720, 56006516

What's included

  • 1x Driver (left) smoke tail light
  • 1x Passenger (right) smoke tail light
  • 2x Red 1157 bulbs
  • 2x Clear 1156 bulbs
  • 4x YJ adapter harnesses
  • 6x Mounting bolts with lock washers

Installation — Jeep Wrangler YJ and TJ (1987-2006)

  1. Confirm the Jeep. A TJ or TJ Unlimited (1997-2006) uses the lamp connector directly. A YJ uses one of the adapter pairs in the box. A JK or JL uses a different lamp. There was no 1996 Wrangler.
  2. The included hardware is six 10mm hex screws and lock washers. Use a 10mm socket.
  3. Remove the factory screws at the rear corner and pull the lamp off the tub. Unplug the connector. Do not hang the lamp from the wires.
  4. Seat one included red 1157 in the brake, park, and turn socket. Seat one included clear 1156 in the reverse socket.
  5. On a TJ or TJ Unlimited, plug the lamp connector into the factory plug.
  6. On a 1987-1990 YJ, plug the pre-facelift adapter between the lamp and the factory plug. On a 1991-1995 YJ, use the facelift adapter. Each style is a left and right pair.
  7. Set the lamp on the corner. Install the included screws with the lock washers and snug them. Check park, brake, both turn signals, reverse, and the license lamp, then repeat on the other side.

Buyer FAQ

Does a JK fit? No. This pair is the YJ and TJ lamp. A 2007-2018 JK and a 2018-2026 JL use a different housing.

What is different on a YJ? The lamp connector is the TJ plug. A 1987-1990 YJ uses the pre-facelift adapters in the box. A 1991-1995 YJ uses the facelift adapters. Both adapters plug in.

What is in the box? Left and right smoke tail lights, two red 1157 bulbs, two clear 1156 bulbs, four YJ adapters, and six bolts with lock washers. Left replaces 56018649. Right replaces 56018648.

También te puede interesar