Short answer: our LED Tail Lights for Gladiator JT are plug-and-play LED brake, turn and reverse assemblies for 2020–2023 Gladiators that came with halogen tail lights. They are made for trucks without the factory Blind Spot Monitor sensors.
Will they fit my Gladiator?
- 2020–2023 Jeep Gladiator JT
- Factory halogen tail lights only
- No factory Blind Spot Monitor sensors
If your truck has blind spot monitoring or came with factory LED tail lights, these aren't the right fit.
Features
- OSRAM LED chips
- Smoked accents and a custom light pattern
- Anti-flicker circuitry to prevent hyper-flash
- Side marker lighting
- Polycarbonate housing with a UV-resistant lens
- IP67 rated
How to install
- Open the tailgate if needed and remove the fasteners holding the factory tail light.
- Pull the light out and unplug it.
- Plug the new light into the factory connector.
- Test the brake, turn and reverse lights before you fasten it.
- Secure the new light and repeat on the other side.
There's no cutting or splicing.
FAQ
Will these fit a Gladiator with blind spot monitoring?
No. They are made for Gladiators without the factory Blind Spot Monitor sensors. If your truck has blind spot monitoring, call us before ordering anything for the rear.
Will my turn signals hyper-flash?
The listing says built-in anti-flicker circuitry prevents hyper-flashing, so you should not need separate load resistors. Test the signals before you finish the install.
Do I need to splice any wires?
No. They are plug and play for 2020–2023 Gladiators with factory halogen tail lights. Unplug the old lights and plug the new ones into the same factory connectors.
Are they waterproof?
They are rated IP67, with a polycarbonate housing and a UV-resistant lens. That rating covers rain, washing and dust, which helps keep moisture out of the housing.
Questions before you order? Call us at 702-988-6800, Mon–Fri 8am–3pm PT. GENSSI has been in business since 2013. Shipping is free to the lower 48, and returns are accepted within 30 days with an RMA.
0 commentaire