Short answer: our Rear Bumper with 2-Inch Receiver and LED Lights for Wrangler JK is a 3/16-inch steel bumper. It bolts onto the factory mounting points of 2-door JK and 4-door JKU Wranglers. It has a 2-inch receiver, two pre-wired LED reverse lights and two D-ring shackles. No drilling or cutting is required.
Fitment
- Jeep Wrangler JK (2-door) and JKU (4-door Unlimited), all trims
- Model years: 2007–2017. It will not fit the Wrangler JL.
What's in the box
- 1 rear bumper assembly
- 2 LED reverse lights, pre-wired
- 2 D-ring shackles
- Hardware kit and instructions
Construction
- 3/16-inch (3.0 mm) steel plate and tubing, fully welded
- Epoxy primer plus textured black powder coat
- Standard 2-inch receiver
How to install
- Get a helper. A steel bumper is heavy and awkward to hold alone.
- Remove the factory rear bumper from its frame mounting points.
- Lift the new bumper into place with a helper or a jack.
- Start all bolts by hand before tightening any of them.
- Tighten the bolts to the torque in the included instructions.
- Wire the LED lights per the instructions and test them.
- Install the D-rings and check every bolt again after your first drive.
The listing recommends a professional install for correct torque. A careful DIYer with a helper can do it with basic hand tools.
FAQ
Will it fit a Wrangler JL?
No. This bumper is made for the JK and JKU, model years 2007 through 2017. The JL has a different rear frame and mounting points, so it will not fit. Call us if you are not sure.
Do I need to drill my frame?
No. The listing says it bolts to the factory JK rear mounting points using the included hardware. There is no drilling, cutting or welding required for the install.
What is the towing rating?
Check your owner manual. Your safe towing limit is set by your Jeep, hitch hardware and ball mount, and it is usually far lower than any receiver rating on a bumper.
Are the LED lights wired already?
The listing says the two LED reverse lights come pre-wired. You still need to connect them to a power source as shown in the included instructions, then test them.
Questions before you order? Call us at 702-988-6800, Mon–Fri 8am–3pm PT. GENSSI has been in business since 2013. Shipping is free to the lower 48, and returns are accepted within 30 days with an RMA.
0 commentaire