Short answer: our Smoked Corner Lights replace the orange factory side markers in the front fender flares of the 2018 and newer Jeep Wrangler JL and JLU. The lens is smoked and the LEDs light up amber. They plug into the factory harness, and the swap takes about 15 minutes.
Fitment
- Jeep Wrangler JL 2-door and JLU 4-door, 2018 and newer
- JL body only. Won't fit the JK.
Specs
- Smoked polycarbonate lens with amber LED output
- Sealed housing
- OEM-style plugs, with no cutting or splicing
- Sold as a pair (left and right)
How to install
- Turn the lights off and turn the wheel for room.
- From the wheel well, remove the screw holding the old marker.
- Unplug the factory light.
- Plug in the new light, then fit it in the flare and refit the screw.
- Test the parking lights and turn signals.
FAQ
Do these need resistors?
No. The listing says they plug into the factory harness with no resistor wiring. If you see a fast blink or a dash warning, call us and we will help you sort it out.
Are they legal?
They light up amber, which is the usual color for front side markers. Rules on smoked lenses vary by state, so check your local laws before you install them.
Will they fit a JK?
No. They are made for the JL body only, 2018 and newer. They do not fit the JK, which has a different flare and marker design.
Do they fit aftermarket flares?
They are made for the factory JL flare openings. Aftermarket flares may use other light shapes, so check your flares before ordering, or call us.
Questions before you order? Call us at 702-988-6800, Mon–Fri 8am–3pm PT. GENSSI has been in business since 2013. Shipping is free to the lower 48, and returns are accepted within 30 days with an RMA.
0 commentaire