991-style bi-xenon headlight pair for the Porsche 987.1

991 Style Bi-Xenon Headlights for Porsche 987 (2005-2008)

$769.95
Passer aux informations sur le produit
991-style bi-xenon headlight pair for the Porsche 987.1

991 Style Bi-Xenon Headlights for Porsche 987 (2005-2008)

$769.95
DS-987-HEAD-991-BIXENON-PAIR-2005-2008

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A 987.1 xenon car picks up the later light-ring face and keeps the factory D2S beam. GENSSI supplies the pair for the Boxster and the Cayman, and the ballast and leveling motor come off the old lamps.

Important Fitment Note: These fit a 2005-2008 Boxster 987.1 and a 2006-2008 Cayman 987.1 that left the factory with xenon headlights. They do not fit a halogen car, and they do not fit the 2009-2012 987.2. The ballast, ignitor, D2S bulb, and auto-leveling motor move over. The LED ring has its own leads and is wired separately from the main connector.

Fitment

YEAR MAKE / MODEL FITS
2005-2008 Porsche Boxster 987.1, factory xenon Yes
2006-2008 Porsche Cayman 987.1, factory xenon Yes
2005-2008 Porsche 987.1 with factory halogen headlights No
2009-2012 Porsche Boxster and Cayman 987.2 No

Specs

  • Style: Chrome housing with a bi-xenon projector and a built-in LED ring
  • Bulbs: D2S high and low beam, PY21W turn. None are in the box. The factory ballast, ignitor, and leveling motor transfer
  • Sold as: Pair for factory xenon 987.1 cars. Ballast, ignitor, D2S bulb, and leveling motor transfer
  • Fit: 2005-2008 Boxster 987.1 and 2006-2008 Cayman 987.1 with factory xenon. Not halogen. Not 987.2

Interchange

98763115702, 98763115802

What's included

  • 1x Driver headlight
  • 1x Passenger headlight

Installation — 2005-2008 Porsche 987.1

  1. Open the front trunk, peel back the trim beside the headlight, and pull out the rubber plug.
  2. Turn the release with the 5mm tool from the trunk toolkit, or a 5mm socket, until the lamp pushes forward.
  3. Slide the lamp off the rails.
  4. Take the rear cap off the old lamp. Remove the two screws on the leveling motor, then lift out the ballast, ignitor, and D2S bulb.
  5. Move those parts into the new lamp. The LED ring uses its own black and green leads. Those leads are wired to the circuit that should light the ring.
  6. Set the release lever down, slide the lamp onto the rails, and turn the tool until it clicks. Refit the plug and the trim, then check low beam, high beam, turn, and the ring.

Buyer FAQ

Will these fit a halogen 987? No. The housing is built for the factory D2S bulb, ballast, and leveling motor.

Does a 2009 Boxster use this pair? No. 2009 starts the 987.2, and the lamp is different. This pair is the 987.1.

Is the ballast in the box? No. The ballast, ignitor, D2S bulb, and leveling motor come off the old lamps.

Vous aimerez peut-être aussi