All Clear Frosted Lens Tail Lights 4pc w/ Bulbs for Lexus LS400 (1990-1994)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Faded red-and-amber tails make a first-gen LS400 look tired from behind—this all-clear frosted set gives it a bright, clean OE-style white-out rear end that lights red, amber, and clear through the included bulbs. GENSSI's LS400 kit is a vehicle-specific 4pc set that plugs into the factory harness with no rewiring and ships with color bulbs in the box.
Important Fitment Note: Fits the 1990-1994 Lexus LS400 (UCF10) only. The 1995-1997 LS400 uses a different tail light and is not compatible.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 1990-1994 | Lexus / LS400 (UCF10), all models | Yes |
| 1995-1997 | Lexus / LS400 | No |
Specs
- Style: Chrome housing, all-clear frosted lens — OE frosted look with a brighter, whiter rear end; polycarbonate lens with UV and impact protection
- Bulbs: Incandescent, color bulbs included — x6 1157 red, x2 1156 amber, x2 1156 clear. Reuse factory sockets
- Sold as: 4pc set: left and right outer lamps + left and right inner lamps, with 10 color bulbs
- Fit: Direct-fit all-clear tails for 1990-1994 Lexus LS400 (UCF10), all models
Interchange
81560-50010, 81590-50010, 81550-50010, 81580-50010
What's included
- 1x Driver outer all-clear frosted tail light
- 1x Passenger outer all-clear frosted tail light
- 1x Driver inner all-clear frosted tail light
- 1x Passenger inner all-clear frosted tail light
- x6 1157 red bulbs
- x2 1156 amber bulbs
- x2 1156 clear bulbs
Installation — Lexus LS400 (1990-1994)
- Open the trunk and pull the corner trim back on one side until the two 10 mm bolts for the outer corner lamp are visible. Remove those bolts.
- Pull that corner lamp straight back off the body. Take out the small screw on the back of the housing and twist the bulb sockets out. Repeat on the other corner.
- For the trunk-lid lamps, remove the trim along the underside of the lid. Each inner lamp uses five 8 mm bolts. The fifth bolt on each side is behind a rubber plug in the corner of the lid. Pull the plug, remove all five bolts, unclip the harness, and lift the lamp off. Repeat on the other inner lamp.
- Transfer the bulb sockets into the new housings in the same positions.
- Bolt the trunk-lid lamps on first and put the rubber plugs back. Push each corner lamp straight on and reinstall its two 10 mm bolts, then refit the trunk trim.
- Check tail, brake, turn, and reverse on both sides with the trunk still open.
Buyer FAQ
Will the red and amber still show when the lights are on? Yes. The lens is clear, and the bulbs supply the color: the box includes six 1157 red bulbs, two 1156 amber signal bulbs, and two 1156 clear reverse bulbs, so brake, parking, signal, and reverse all light in the right color.
Do I have to re-wire anything? No. The lamps connect to the factory harness with no rewiring and no splicing. Sockets are not included, so move your factory sockets over.
Which LS400 years fit, and what is in the box? The 1990-1994 LS400 (UCF10), all models. You get four lamps (outer and inner, left and right) plus ten bulbs, matching OEM 81560-50010 / 81590-50010 on the left and 81550-50010 / 81580-50010 on the right.