Black Halogen Headlights and Corner Lights Set for Ford Ranger (2001-2011)
$111.95
Passer aux informations sur le produit
Black Halogen Headlights and Corner Lights Set for Ford Ranger (2001-2011)
$111.95
DS-296435039139
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: This 4-piece set fits the 2001-2011 Ford Ranger pickup with factory halogen headlights. It will not fit the 1998-2000 or 1993-1997 Ranger (different lamps; we carry those separately) or headlights with HID / xenon equipment. Bulbs are not included: the headlights use 9007 (HB5) bulbs and 3157A turn signal bulbs, so reuse your old ones or buy new.
Black out the front of your Ranger in one move. This set replaces both headlights and both corner lights on the 2001-2011 Ranger, so all four lenses match and the fogged, yellow look is gone. The black housings and clear lenses give the truck a cleaner, tougher look, and every piece fits the factory mounts and connectors with no cutting.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2001-2011 | Ford Ranger | Pickup with factory halogen headlights. Not 1993-2000. |
Specs
- Sold as: complete 4-piece set (driver and passenger headlights, driver and passenger corner lights)
- Housing: black with clear lenses
- Headlight: halogen reflector, one dual-beam bulb per side
- Headlight bulb: 9007 (HB5); turn signal bulb: 3157A; bulbs not included
- DOT and SAE compliant
- Fits the factory mounts and connectors (no splicing)
In the Box
- Driver-side headlight
- Passenger-side headlight
- Driver-side corner light
- Passenger-side corner light
Interchange References
Replaces the original assemblies commonly crossed with 3L5Z13008BA, 3L5Z13008CA, 6L5Z13008AA, FO2502173, FO2503173, FO2521168, FO2531171.
Installation: Ford Ranger (2001-2011)
The 2001-2011 Ranger is one of the easiest trucks to swap lamps on: everything comes out from the top with the hood open, no bumper removal. Turn the lights off before you start.
- Open the hood. Remove the small bolts holding the plastic cover over the top of the headlight, then lift the cover off.
- Lift the two metal retaining tabs behind the headlight only to their balance (float) point, not all the way, then pull the headlight forward.
- Twist out the turn signal socket and the headlight bulb collar, then unplug the bulb.
- With the headlight out, remove the corner light fasteners, slide the corner light off its locating pin and twist out its socket.
- Install the new corner light, then put your bulbs in the new headlight, line its pins up with the openings, push it home and lock the tabs down. Refit the top cover, test all lights and aim the headlights.
Frequently Asked Questions
Which vehicles do these headlights fit?
2001-2011 Ford Ranger pickups with factory halogen headlights. They do not fit 1993-2000 Rangers. Compare your current lamps with our photos before ordering.
What comes in the set?
Both headlights and both corner lights, driver and passenger side.
What bulbs do I need?
The headlights use a 9007 (HB5) dual-beam bulb and a 3157A turn signal bulb per side. Bulbs are not included, so reuse your current bulbs or buy new ones.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2001-2011 Ford Ranger?
Everything is done from the top with the hood open. Remove the top cover, lift the two retaining tabs to their float point, pull the headlight out, then remove the corner light behind it. No bumper removal is needed.