Black Halogen Headlights Pair for Hyundai Sonata (2006-2008)
$136.95
Passer aux informations sur le produit
Black Halogen Headlights Pair for Hyundai Sonata (2006-2008)
$136.95
DS-921010A000-BK
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: For the 2006-2008 Sonata front end. Bulbs are not included.
Black Halogen Headlights Pair for Hyundai Sonata (2006-2008). New driver and passenger replacement assemblies with clear lenses. Match the original housing and factory lighting equipment before ordering.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2006-2008 | Hyundai Sonata | For the 2006-2008 Sonata front end. Bulbs are not included. |
Specs
- Sold as: driver and passenger pair
- Lighting: Halogen
- Low beam H7; high beam H1; turn/marker 2357A. Bulbs not included.
- DOT/SAE compliance stated in the product listing
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
921010A000, 921020A000, HY2502135, HY2503135
Installation: Hyundai Sonata (2006-2008)
Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.
- Release the lower bumper-cover push clips, corner fasteners and upper attachments on the 2006-2008 Sonata. Support the fascia clear of the lamp rather than levering against the fender.
- Remove the two upper 10 mm headlight bolts, draw the assembly forward and unplug its rear harness. Keep the serviceable bulb sockets and mounting hardware organized by side.
- Transfer compatible H7 low-beam and H1 high-beam bulbs and signal sockets. Seat the replacement, reconnect and secure it, then refit the bumper attachments; test all functions and have beam aim checked.
Frequently Asked Questions
Which factory lighting configuration is compatible?
For the 2006-2008 Sonata front end. Bulbs are not included.
Which bulbs are used and included?
Low beam H7; high beam H1; turn/marker 2357A. Bulbs not included.
What access is needed for installation?
The front bumper-cover attachments are released for lamp access; two upper 10 mm bolts retain the housing. Professional installation and beam aiming are recommended.