Black Halogen Headlights Pair for Jeep Grand Cherokee (2008-2010)

Black Halogen Headlights Pair for Jeep Grand Cherokee (2008-2010)

$130.95
Passer aux informations sur le produit
Black Halogen Headlights Pair for Jeep Grand Cherokee (2008-2010)

Black Halogen Headlights Pair for Jeep Grand Cherokee (2008-2010)

$130.95
DS-55157482AE

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Fitment warning: These headlights fit the 2008-2010 Jeep Grand Cherokee (WK facelift) with factory halogen lamps (55157482AE / 55157483AE). They will not fit 2005-2007 Grand Cherokee (2005-2007 Grand Cherokee halogen pair) or factory HID / xenon lamps, which use a different housing.

Replace faded or cracked factory halogen lamps on your 2008-2010 Grand Cherokee with this OE-style black-housing pair. Each lamp has the twin-round halogen low and high beam and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your 9006 low-beam and 9005 high-beam bulbs, or add new ones.

Fitment

Years Vehicle Notes
2008-2010 Jeep Grand Cherokee WK facelift, factory halogen only. Not 2005-2007. Not HID / xenon.

Specs

  • Sold as: driver and passenger pair
  • Housing: black, clear lens, amber side marker
  • Low beam: 9006; high beam: 9005
  • Bulbs not included — reuse your bulbs
  • Plugs into the factory connectors (no splicing)

In the Box

  • Driver-side halogen headlight
  • Passenger-side halogen headlight

Interchange References

Replaces the original assemblies commonly crossed with 55157482AE, 55157483AE, CH2518131, CH2519131.

Installation: Jeep Grand Cherokee (2008-2010)

On the 2008-2010 WK Grand Cherokee the grille and fasteners at the inner fender and upper core support are loosened so you can reach the headlight bolts. A full bumper-cover removal is usually not required. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.

  1. Open the hood. Remove the grille fasteners and ease the grille forward enough to reach the inner headlight bolts.
  2. Remove the remaining fasteners at the inner fender and upper core support.
  3. Unplug the headlight connector, remove the mounting bolts and lift the lamp out.
  4. Transfer your 9006 and 9005 bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
  5. Refit the grille, reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.

Frequently Asked Questions

Which vehicles do these headlights fit?
2008-2010 Jeep Grand Cherokee with factory halogen headlights. They do not fit 2005-2007 Grand Cherokee or factory HID / xenon lamps.

Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Will these fit a 2005-2007 Grand Cherokee?
No. 2005-2007 uses a different lamp. Use the 2005-2007 Grand Cherokee halogen pair for that generation.

Will these fit a factory HID Grand Cherokee?
No. These are halogen lamps (55157482AE / 55157483AE). Factory HID uses a different housing.

Are bulbs included?
No. Reuse your 9006 low-beam and 9005 high-beam bulbs, or add new ones.

Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.

How are they installed on a 2008-2010 Jeep Grand Cherokee?
The grille and inner-fender fasteners are loosened so you can reach the headlight bolts. A full bumper-cover removal is usually not required. Then unplug the lamp, transfer your bulbs if you are reusing them, install the new lamp and aim the beams.

Vous aimerez peut-être aussi