Black Halogen Headlights Pair for Nissan Altima (2016-2018)
$162.95
Passer aux informations sur le produit
Black Halogen Headlights Pair for Nissan Altima (2016-2018)
$162.95
DS-260609HS4A
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2016-2018 Nissan Altima with factory halogen lamps and no LED daytime running light (26060-9HS4A / 26010-9HS4A). They will not fit lamps with an LED DRL, HID or LED headlights, 2013-2015 Altima (2013-2015 Altima halogen pair) or 2019-2022 Altima (2019-2022 Altima S halogen pair / 2019-2022 Altima 2.5 LED pair).
Replace faded or cracked factory halogen lamps on your 2016-2018 Altima with this OE-style black-housing pair. Each lamp has the halogen low and high beam and an amber side marker, without an LED daytime running light bar, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your H11 low-beam and H9 high-beam bulbs, or add new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2016-2018 | Nissan Altima | Factory halogen without LED DRL. Not HID, not factory LED, not lamps with an LED DRL. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber side marker
- Low beam: H11; high beam: H9
- Bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight
- Passenger-side halogen headlight
Interchange References
Replaces the original assemblies commonly crossed with 26060-9HS4A, 26010-9HS4A, NI2502247, NI2503247.
Installation: Nissan Altima (2016-2018)
On the 2016-2018 Altima the front bumper cover has to come off to reach the headlight bolts. Plan on a helper, trim tools and spare bumper clips. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the fasteners across the top of the bumper and grille, the screws in each wheel well and the bolts underneath, then release each bumper corner from the fender.
- With a helper, ease the cover forward, unplug any fog light or similar connectors and set the cover on a soft surface.
- Unplug the headlight connector, remove the mounting bolts and lift the lamp out.
- Transfer your H11 and H9 bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the bumper, reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Which vehicles do these headlights fit?
2016-2018 Nissan Altima with factory halogen headlights and no LED daytime running light. They do not fit lamps with an LED DRL, HID or factory LED, or 2013-2015 or 2019-2022 Altima.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Will these fit an Altima with LED daytime running lights?
No. This pair is the halogen lamp without an LED DRL. Lamps with an LED DRL use a different housing.
Are bulbs included?
No. Reuse your H11 low-beam and H9 high-beam bulbs, or add new ones.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2016-2018 Nissan Altima?
The front bumper cover has to come off. Then unplug the headlight, remove its bolts, transfer your bulbs if you are reusing them, install the new lamp and aim the beams.