Black Halogen Headlights Pair for Nissan Rogue (2008-2013) and Rogue Select (2014-2015)
$113.95
Passer aux informations sur le produit
Black Halogen Headlights Pair for Nissan Rogue (2008-2013) and Rogue Select (2014-2015)
$113.95
DS-26060JM00A
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2008-2013 Nissan Rogue and the 2014-2015 Nissan Rogue Select with factory halogen headlights (26060-JM00A / 26010-JM00A). They will not fit factory HID / xenon lamps (26060-JM20C) and they will not fit the 2014-2020 Rogue (T32) or the 2021 and newer Rogue, which use different lamps. If you have a 2021-2023 Rogue S, we carry that LED pair here.
Replace faded or cracked factory halogen lamps on your 2008-2013 Rogue or 2014-2015 Rogue Select with this OE-style black-housing pair. Each lamp has the halogen low and high beam and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your H11 low-beam and 9005 high-beam bulbs, or add new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2008-2013 | Nissan Rogue | Factory halogen only. Not HID / xenon. |
| 2014-2015 | Nissan Rogue Select | Factory halogen only. Not the 2014-2020 T32 Rogue. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber side marker
- Low beam: H11; high beam: 9005
- Bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight
- Passenger-side halogen headlight
Interchange References
Replaces the original halogen assemblies commonly crossed with 26060-JM00A, 26010-JM00A, NI2502170, NI2503170.
Installation: Nissan Rogue (2008-2013) and Rogue Select (2014-2015)
On these first-generation Rogues the front bumper cover is loosened or removed so you can reach the headlight bolts. Work with a helper and a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the clips and fasteners along the top of the bumper cover and grille.
- Remove the fasteners in each front wheel liner and at the bumper corners. Ease the cover forward enough to reach the headlight bolts, or set it aside.
- Unplug the headlight connector, remove the mounting bolts, and lift the lamp out.
- Transfer your H11 and 9005 bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the bumper cover, reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Which vehicles do these headlights fit?
2008-2013 Nissan Rogue and 2014-2015 Nissan Rogue Select with factory halogen headlights. They do not fit factory HID lamps, the 2014-2020 T32 Rogue, or 2021 and newer Rogue.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Will these fit a factory HID Rogue?
No. These are halogen lamps (26060-JM00A). HID / xenon lamps use a different housing (26060-JM20C).
Are bulbs included?
No. Reuse your H11 low-beam and 9005 high-beam bulbs, or add new ones.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.