GENSSI hero — black headlights corners 1pc style pair Toyota Land Cruiser FJ100 (1998-2005) white background

Black Headlights & Corners 1pc Style Pair for Toyota Land Cruiser FJ100 (1998-2005)

$489.95
Passer aux informations sur le produit
GENSSI hero — black headlights corners 1pc style pair Toyota Land Cruiser FJ100 (1998-2005) white background

Black Headlights & Corners 1pc Style Pair for Toyota Land Cruiser FJ100 (1998-2005)

$489.95
DS-FJ100-HEAD-BLK-CORNER-1PC-1998-2005

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Faded multi-piece FJ100 lamps dull a capable 100-series nose—black 1pc-style headlights with corners tighten the front into one aggressive unit. GENSSI's 1998-2005 Land Cruiser kit includes bulbs and adapters for a plug-and-play swap after grille access.

Important Fitment Note: Fits 1998-2005 Toyota Land Cruiser 100-series (FJ100) halogen trucks. Does not fit Lexus LX470 or 2006-2007 one-piece facelift lamps.

Fitment

YEAR MAKE / MODEL FITS
1998-2005 Toyota / Land Cruiser FJ100 Yes

Specs

  • Style: Black housing, clear lens, 1pc headlight and corner style
  • Bulbs: H7 low / H7 high, PY21W signal, W5W parking — bulbs included; H4-to-9005/9006 adapters included
  • Sold as: Headlight and corner pair with bulbs and adapters
  • Fit: Direct replacement, plugs into factory connectors

Interchange

81019-60070, 81059-60070

What's included

  • 1x Driver headlight/corner assembly
  • 1x Passenger headlight/corner assembly
  • Bulbs (pair set)
  • H4 to 9005 adapters
  • H4 to 9006 adapters

Installation — Toyota Land Cruiser FJ100 (1998-2005)

  1. Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
  2. Remove the radiator grille. Release the front bumper filler/trim clips and fasteners needed to reach the headlight screws—have spare clips ready on these older trucks.
  3. Disconnect both connectors on each assembly. Remove the three retaining screws, disengage the clip/pin, and slide the headlight/corner unit straight forward off its locating pins.
  4. Compare old and new assemblies side by side. Install the included bulbs and H4 adapters as required without touching halogen glass.
  5. Seat each new black assembly on the locating pins, reconnect both connectors, and tighten the three screws evenly while checking panel gaps to the hood and fender.
  6. Test low beam, high beam, signal, and parking lights before refitting the grille and filler trim. Reconnect the battery and aim the beams.

Buyer FAQ

Will these fit a Lexus LX470? No. This kit is for the Toyota Land Cruiser FJ100 (1998-2005) only.

Are bulbs included? Yes. Bulbs plus H4-to-9005/9006 adapters are included.

Do I remove the whole bumper? Usually no—remove the grille and bumper filler/trim for fastener access, then unbolt each assembly.

Vous aimerez peut-être aussi