Black HID Headlights Pair with LED DRL for GMC Sierra 2500/3500 HD (2016-2019)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace faded or cracked factory HID lamps on your 2016-2019 Sierra 2500 HD or 3500 HD with this black-housing pair. Each lamp has an LED daytime running light, bolts to the factory points, and plugs into the factory connectors, with no splicing.
Important Fitment Note: Fits 2016-2019 Sierra 2500 HD and 3500 HD with factory HID and LED DRL only. Not halogen. Not 2015. Reuse your original D5S bulbs and ballast.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2016-2019 | GMC Sierra 2500 HD | Factory HID with LED DRL only. Not halogen. Not 2015. |
| 2016-2019 | GMC Sierra 3500 HD | Factory HID with LED DRL only. Not halogen. Not 2015. |
Specs
- Sold as: driver and passenger pair (two lamps)
- Housing: black, clear lens, LED daytime running light
- High and low beam: HID, D5S (bulbs and ballast not included; reuse your originals)
- Turn signal and side marker: 7443 (W21/5W) bulbs included
- Daytime running light: LED, built in
- DOT and SAE compliant
- Plugs into the factory connectors (no splicing)
Interchange
Replaces / cross-references: 84180593, 84180592, GM2502472, GM2503472, 19433917, 19434275, 84012633, 84062137, 84140102, 84228052, 19433916, 19434274, 84012632, 84062136, 84140101, 84228051
What's included
- 1x driver side (left) HID headlight housing (84180593)
- 1x passenger side (right) HID headlight housing (84180592)
- 7443 (W21/5W) turn and side-marker bulbs (installed)
- D5S HID bulbs and ballast are not included — reuse your originals
Installation — 2016-2019 GMC Sierra 2500 HD / 3500 HD
Tools: socket set, screwdrivers, and a plastic trim tool. Estimated time: about 45 to 90 minutes.
- Park on level ground, open the hood, turn the lights and ignition off, and disconnect the negative battery cable. On 2016-2019 Sierra 2500 HD and 3500 HD the headlight is usually reached from the engine bay and the inner fender; the bumper cover typically stays on.
- Turn the front wheels out and remove the inner-fender liner fasteners on that side so you can reach any lower headlight bolts.
- Unplug the factory connectors from the back of the lamp, including the HID ballast connector.
- Remove the mounting bolts from the top of the housing and from the fender side, then ease the lamp forward and out. Leave the factory ballast and D5S bulb with the vehicle so you can transfer them.
- Transfer your original D5S bulb and ballast to the new housing, set the lamp in place, install the bolts, and reconnect the factory connectors. Repeat on the other side.
- Refit the fender liner, reconnect the battery, test the HID beams, LED daytime running lights, and turn signals, then aim the beams on a level surface.
Buyer FAQ
Will these fit a 2016-2019 Sierra 2500 HD or 3500 HD with factory halogen headlights, or a 2015 truck? No. These fit 2016-2019 GMC Sierra 2500 HD and 3500 HD models with factory HID headlights and an LED daytime running light only. They will not fit factory halogen lamps, and they are not for 2015.
Are the HID bulbs and ballast included? No. Reuse your original D5S HID bulbs and ballast. The 7443 (W21/5W) turn and side-marker bulbs are included. The LED daytime running light is built into the housing.
Do they plug into the factory connectors? Yes. They bolt to the factory points and plug into the factory connectors, with no splicing. Replaces 84180593, 84180592, GM2502472, and GM2503472.