Black HID Projector Headlights Pair for Jeep Cherokee KL (2014-2018)

Replace hazy or damaged lower headlamps on your 2014-2018 Jeep Cherokee with factory HID with this brand-new pair of black HID/Xenon projector headlights. Half assembly: reuse your bulbs, ballasts and high-voltage wires.

Fitment

Will NOT fit: Halogen Cherokee (halogen black-trim lamps); the upper DRL/turn signal unit (not included); 2019+ facelift Cherokee; Grand Cherokee.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Black
• Low/high beam: HID projector (bulb NOT included)
• Position: Lower main headlamp
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 68102848AG, 68102849AA, 68102849AB, 68102849AC, 68102849AD, 68102849AE, 68102849AF, 68102848AA, 68102848AB, 68102848AC, 68102848AD, 68102848AE, 68102848AF. Partslink: CH2503250, CH2502250.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours

Installation

1. Remove the lower splash shield (nine 10 mm bolts). Open the hood and remove the 12 two-piece clips holding the upper radiator panel.
2. Remove the 10 mm bumper bolts at the top on each side. Remove the front wheels (or turn them) and the three 8 mm wheel-liner bolts, then pry off the flare.
3. Pull the liner back, unplug the fog/headlight harness connector on the left side and remove the 10 mm bolt at each upper corner.
4. Pull the bumper out at the sides, unclip it under the lights and remove it.
5. Remove the four 10 mm headlamp bolts, transfer your HID bulbs, ballasts and wires, plug in and fit the new lamp. Do not overtighten the bolts; refit the bumper and aim.

Steps compiled from 1A-style 2014-2023 Cherokee headlight video, HowToo and Go-Parts 2014-2018 Cherokee headlight guides. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
The listing does not state the bulb size. This is a half assembly: per the listing, move over your HID bulbs, ballasts and high-voltage wires.

Is this the upper or lower Cherokee light?
The 2014-2018 Cherokee has a two-piece setup. This is the lower main headlamp in the bumper; the slim upper DRL/turn light is separate.

Do I need to remove the front bumper to replace these headlights?
Yes. The lower headlamp sits behind the fascia, which comes off after the splash shield, upper panel clips, wheel-liner bolts and corner bolts. Four 10 mm bolts hold each lamp.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.