Black LED Headlights Pair for Freightliner Cascadia (2018-2026)

Replace the factory lamps on your 2018-up Freightliner Cascadia with this black LED pair. Each assembly uses a LED daytime running light bar, LED lighting functions, and an amber side marker. Sold as a driver and passenger pair.

Fitment

Specs

• Condition: New
• Sold as: Driver and passenger pair
• Lighting: LED, including daytime running light
• Housing: Black, amber side marker
• Operating voltage: 12V
• Warranty: 1 year

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly

Interchange References

A6601405003

Installation: Freightliner Cascadia (2018-2026)

On a 2018-up Cascadia the hood tilts forward and the headlight is usually reached from the engine bay. You usually do not need to remove the bumper. Professional installation and beam aiming are recommended.

1. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
2. Tilt the hood open and support it. From the engine bay, unplug the harness at the back of the old assembly.
3. Remove the mounting bolts that hold the lamp to the front header. Support the assembly as you take out the last bolt, then slide it forward off the alignment pins.
4. Set the new assembly on the same pins, start the bolts by hand, and snug them evenly. Do not overtighten the housing ears. Reconnect the factory harness until it clicks.
5. Repeat on the other side, reconnect the battery, and test every lighting function. Aim the lamps on level ground before driving at night.

Frequently Asked Questions

Which trucks do these headlights fit?
Freightliner Cascadia trucks from 2018 through 2026 with this LED housing. Compare your current lamps with our photos before ordering.

Will they fit a 2008-2017 Cascadia?
No. That generation uses a different headlight and is not covered.

Are these a complete pair?
Yes. You get the driver-side and passenger-side headlight assemblies.