Black LED Headlights Pair for Toyota Tundra (2007-2013) / Sequoia (2008-2017)

Update a 2007-2013 Tundra or a 2008-2017 Sequoia with a black housing pair that uses an LED high beam, LED daytime running light, and LED side marker, with a halogen low beam. You get driver and passenger assemblies with a clear lens and an amber side marker. The H7 low-beam bulb is not included — reuse your factory H7 bulbs or install new ones when you swap the lamps.

Fitment

Specs

• Sold as: a driver and passenger pair
• Style: black housing, clear lens, amber side marker, LED high beam and daytime running light, halogen low-beam projector
• Lighting: halogen low beam (H7, not included); LED high beam, daytime running light, and side marker
• DOT and SAE certified
• 12 V
• New aftermarket assemblies

In the Box

• Driver and passenger black LED headlights

Interchange References

Replaces original-style 2007-2013 Tundra and 2008-2017 Sequoia headlights commonly crossed with 81150-0C051, TO2502171, and TO2503171.

Installation: Toyota Tundra (2007-2013) and Sequoia (2008-2017)

On these trucks the headlight is typically easier to remove after the grille is loosened or taken off, because the mounting bolts sit along the top and inboard edge of the housing. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start. If your Tundra has factory headlight leveling, plan on losing that function with this pair.

1. Remove or loosen the grille so you can reach the headlight bolts along the top of each housing.
2. Support the lamp, remove the bolts, and pull the assembly forward. Disconnect the harness.
3. Transfer your H7 low-beam bulb into the new housing, or install a new H7 bulb.
4. Connect the new headlight, seat it in the opening, and reinstall the bolts. Repeat on the other side.
5. Reinstall the grille, reconnect the battery, and check low beam, high beam, the LED daytime running light, and the side marker. Aim the headlights on a level surface before driving at night.

Frequently Asked Questions

Which vehicles does this pair fit?
Toyota Tundra (2007-2013) and Sequoia (2008-2017) that use this housing. Compare your current housings with our photos before ordering.

Will factory headlight leveling still work?
On Tundra trucks with factory headlight leveling, these lamps will install, but the leveling function will not operate.

Are bulbs included?
The low beam uses an H7 halogen bulb, which is not included — reuse your factory H7 bulbs or install new ones. High beam, daytime running light, and side marker lighting are LED.

Is this a full-LED headlight?
No. Low beam is halogen (H7). High beam, the daytime running light, and the side marker are LED.