Black Projector Headlights Pair w/ LED Tube for Chevrolet Camaro (2010-2013)

Black Projector Headlights Pair w/ LED Tube for Chevrolet Camaro (2010-2013)

$281.95
Passer aux informations sur le produit
Black Projector Headlights Pair w/ LED Tube for Chevrolet Camaro (2010-2013)

Black Projector Headlights Pair w/ LED Tube for Chevrolet Camaro (2010-2013)

$281.95
DS-GM2502346-LED

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Fitment warning: These headlights fit Chevrolet Camaro (2010-2013) models that use this black-housing projector assembly with the LED tube daytime running light. They will not fit 2014-up Camaro or 2010-2013 cars that use a different headlight layout. Compare your current housings with our photos before ordering.

Update a 2010-2013 Camaro with a black projector pair and a built-in LED tube daytime running light. You get driver and passenger assemblies with a clear lens and black housing, plus included H9 bulbs for high and low beam.

Fitment

Years Vehicle Notes
2010-2013 Chevrolet Camaro Black projector with LED tube DRL; not 2014-up

Specs

  • Sold as: a driver and passenger pair
  • Style: black housing, clear lens, halogen projector, LED tube daytime running light
  • Lighting: halogen high and low beam, H9 bulbs included; LED tube DRL
  • DOT certified
  • 12 V
  • New aftermarket assemblies

In the Box

  • Driver and passenger black projector headlights with LED tubes
  • 2 H9 headlight bulbs

Interchange References

Replaces original-style 2010-2013 Camaro headlights commonly crossed with GM2502346, GM2503346, 92232124, and 92232125.

Installation: Chevrolet Camaro (2010-2013)

On these Camaros the headlight is typically easier to remove after the front fascia is loosened or taken off, because some of the mounting bolts sit behind the bumper cover. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

  1. Remove the upper radiator cover and the bolts along the top of the bumper cover. Turn the front wheels out, then release the inner-fender clips and the fasteners under the front edge of the bumper so you can slide the cover forward or remove it.
  2. Unplug the headlight connectors, including the LED tube connector if it is separate. Remove the headlight mounting bolts and lift the old assembly out of the fender opening.
  3. Install the included H9 bulbs in the new headlight and confirm the LED tube connector is seated.
  4. Set the new headlight in the opening, start all bolts by hand, then tighten them evenly so the housing sits flush to the fender and bumper.
  5. Reinstall the bumper cover, reconnect the battery, and test low beam, high beam, and the LED tube. Aim the headlights on a level surface before driving at night.

Frequently Asked Questions

Which Camaros does this pair fit?
Chevrolet Camaro (2010-2013) with this black projector headlight and LED tube. Compare your current housings with our photos before ordering.

Will it fit a 2014-up Camaro?
No. The 2014-up Camaro uses a different headlight. Do not order this pair for those years.

Are bulbs included?
Yes. Each pair includes two H9 bulbs for high and low beam. The daytime running light is an LED tube.

Does this pair include both sides?
Yes. You get the driver and passenger headlights.

Vous aimerez peut-être aussi