Chrome Amber Halogen Headlights Pair for Dodge Ram 1500 (2002-2005) & 2500/3500 (2003-2005)
$99.95
Passer aux informations sur le produit
Chrome Amber Halogen Headlights Pair for Dodge Ram 1500 (2002-2005) & 2500/3500 (2003-2005)
$99.95
DS-55077121AE-CH
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Fits 2002-2005 Dodge Ram 1500 and 2003-2005 Ram 2500/3500. Bulbs are not included.
New chrome amber halogen headlights, sold as a driver-side and passenger-side pair for the 2002-2005 Dodge Ram 1500 and 2003-2005 Ram 2500/3500 application listed below.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2002-2005 | Dodge Ram 1500 | See fitment warning |
| 2003-2005 | Dodge Ram 2500 | See fitment warning |
| 2003-2005 | Dodge Ram 3500 | See fitment warning |
Specs
- Condition: New
- Sold as: Left and right pair
- Style: Chrome Amber
- Lighting type: Halogen
- Bulb application: 9007 combined high/low beam; 4157NA signal
- Bulbs not included
Shop by bulb size: 9007 | 4157NA
In the Box
- 1 driver-side headlight assembly
- 1 passenger-side headlight assembly
Interchange References
55077121AE, 55077120AE, 55077121AF, 55077120AF, 55077121AG, 55077120AG, CH2502135, CH2503135, CH2502161, CH2503161
Installation: 2002-2005 Dodge Ram 1500 and 2003-2005 Ram 2500/3500
Professional installation and beam aiming are recommended.
- Open the hood. Remove the Phillips screw that secures the rubber gasket/seal above the headlight and fold the gasket back.
- Remove the 10 mm bolts holding the headlight, pull the assembly out and disconnect the wiring harness.
- Fit compatible 9007 headlamp and 4157NA-type signal bulbs, reconnect the harness, reinstall the 10 mm bolts and secure the gasket with its screw. Test all functions and check beam aim.
Frequently Asked Questions
What should I check before ordering?
Fits 2002-2005 Dodge Ram 1500 and 2003-2005 Ram 2500/3500. Bulbs are not included.
Are bulbs included?
No. This package contains the headlight assemblies only; bulbs are not included.
What access is needed to replace the assemblies?
Open the hood. Remove the Phillips screw that secures the rubber gasket/seal above the headlight and fold the gasket back.