Chrome Halogen Headlights Pair for Honda Pilot (2012-2015)

Chrome Halogen Headlights Pair for Honda Pilot (2012-2015)

$141.95
Passer aux informations sur le produit
Chrome Halogen Headlights Pair for Honda Pilot (2012-2015)

Chrome Halogen Headlights Pair for Honda Pilot (2012-2015)

$141.95
DS-33100SZAA11

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Fitment warning: These headlights fit the 2012-2015 Honda Pilot with factory halogen lamps (33100-SZA-A11 / 33150-SZA-A11). They will not fit 2009-2011 Pilot (2009-2011 Pilot halogen pair).

Replace faded or cracked factory halogen lamps on your 2012-2015 Pilot with this OE-style chrome-housing pair. Each lamp has the halogen low and high beam and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your H11 low-beam and 9005 high-beam bulbs, or add new ones.

Fitment

Years Vehicle Notes
2012-2015 Honda Pilot Factory halogen (33100-SZA-A11). Not 2009-2011.

Specs

  • Sold as: driver and passenger pair
  • Housing: chrome, clear lens, amber side marker
  • Low beam: H11; high beam: 9005
  • Bulbs not included — reuse your bulbs
  • Plugs into the factory connectors (no splicing)

In the Box

  • Driver-side halogen headlight
  • Passenger-side halogen headlight

Interchange References

Replaces the original assemblies commonly crossed with 33100-SZA-A11, 33150-SZA-A11, HO2503147.

Installation: Honda Pilot (2012-2015)

On the 2012-2015 Pilot the front bumper cover has to come off to reach the headlight bolts. Plan on a helper, trim tools and spare bumper clips. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.

  1. Open the hood. Remove the fasteners across the top of the bumper and grille, the screws in each wheel well and the bolts underneath, then release each bumper corner from the fender.
  2. With a helper, ease the cover forward, unplug any fog light or similar connectors and set the cover on a soft surface.
  3. Unplug the headlight connector, remove the mounting bolts and lift the lamp out.
  4. Transfer your H11 and 9005 bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
  5. Refit the bumper, reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.

Frequently Asked Questions

Which vehicles do these headlights fit?
2012-2015 Honda Pilot with factory halogen headlights. They do not fit 2009-2011 Pilot.

Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Will these fit a 2009-2011 Pilot?
No. 2009-2011 uses a different lamp (33100-SZA-A01). Use the 2009-2011 Pilot halogen pair for that generation.

Are bulbs included?
No. Reuse your H11 low-beam and 9005 high-beam bulbs, or add new ones.

Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.

How are they installed on a 2012-2015 Honda Pilot?
The front bumper cover has to come off. Then unplug the headlight, remove its bolts, transfer your bulbs if you are reusing them, install the new lamp and aim the beams.

Vous aimerez peut-être aussi