Chrome Halogen Headlights Pair w/o LED DRL for Chrysler 200 (2015-2017)

Replace yellowed or cracked headlights on your 2015-2017 Chrysler 200 with factory halogen headlights without LED DRL with this brand-new chrome pair.

Fitment

Will NOT fit: Cars with LED DRL or HID headlights.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Chrome
• Headlight: HB3 (9005)
• LED DRL: none
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 68284784AA. Partslink: CH2502260, CH2503260.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Headlights per listing

Installation

1. Disconnect the negative battery cable. Remove the under-hood upper close-out panel clips and the six bolts along the top of the fascia.
2. Remove the belly pan and lower close-out bolts, then the three splash-shield bolts and the corner bolt in each wheel well.
3. Pull the fascia corners out of the fender clips, release it from the brackets under the headlights, pull it forward and unplug the harness.
4. Remove the headlamp bolts, unplug the lamp, install the new one, refit the fascia and aim the headlights.

Steps compiled from 200Forums "How to remove from bumper cover" thread, Remont-bampera Chrysler 200 2015-2017 guide. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
Per the item specifics: HB3 (9005) headlight bulb. Match your factory turn and marker bulbs.

Will these fit a 200 with LED DRL?
No. Per the listing these fit factory halogen lamps without LED DRL only.

Do I need to remove the front bumper to replace these headlights?
Yes. On the 2015-2017 Chrysler 200 the front fascia comes off (top bolts under the close-out panel, lower bolts, wheel-well bolts) to reach the headlamp bolts.

Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.