Chrome HID Projector Headlights Pair for Cadillac DTS (2006-2011)

Replace yellowed or damaged headlights on your 2006-2011 Cadillac DTS with this brand-new pair of chrome HID/Xenon projector headlight assemblies. Half assembly: reuse your factory HID bulbs and ballasts.

Fitment

Will NOT fit: Halogen-equipped cars; DeVille (2000-2005).

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Chrome
• Lens: Clear
• Low beam: HID/Xenon projector (not included)
• High beam: HB3 / 9005 halogen
• Turn signal: 3157A amber
• Side marker: W5W
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 20861482, 20861481, 20861482_2006. Partslink: GM2503275, GM2502275.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours

Installation

1. Park on level ground, turn the engine off, and disconnect the negative battery cable.
2. Open the hood and remove the clips/bolts holding the grille or upper bumper cover as needed to reach the headlight bolts.
3. Remove the headlight mounting bolts, pull the headlight forward, and unplug the connector(s).
4. Plug in the new headlight and test low beam, high beam, turn signal, and marker lights before mounting.
5. Bolt the new headlight in place and reinstall trim and clips.
6. Reconnect the battery and aim the headlights against a flat wall before night driving.

Professional installation is recommended if you are unsure.

FAQs

What bulbs do these headlights use?
Low beam is factory HID (not included), high beam is HB3 (9005), turn is 3157A and marker W5W.

Can I install LED bulbs?
The high beam accepts a 9005 LED kit.

Will these fit a halogen DTS?
No. These are for factory HID cars.