Chrome HID Projector Headlights Pair for Dodge Dart (2013-2016)

Replace yellowed or cracked HID headlights on your 2013-2016 Dodge Dart with this brand-new chrome HID projector pair. Reuse your factory bulbs and ballasts.

Fitment

Will NOT fit: Halogen Darts.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low beam: HID, match your factory bulbs (reuse them)
• Housing: Chrome
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 68292806AB, 68081391AA, 68081391AB, 68081391AC, 68081391AD, 68081391AE, 68081391AF, 68081391AG, 68081391AH, 68081391AI, 68081391AJ, 68292807AA, 68081390AH, 68081390AI, 68081390AJ, 68292806AA. Partslink: CH2519144, CH2518144.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• HID bulbs and ballasts are NOT included; reuse your factory ones

Installation

1. Remove the upper radiator cover (10 mm bolts and push pins).
2. Remove the push pins and 10 mm bolts along the top of the fascia, and the Phillips/8 mm screws underneath.
3. Remove the wheel-well screws (8 mm) on each side, then pull the fascia corners out of the side clips; unplug fog lights and the active grille shutter connector before removing the fascia.
4. Remove the headlamp bracket (two 10 mm nuts and three 10 mm bolts), then the 10 mm rear bolt and the angled 7/8 mm lower screw.
5. Release the push pin, unplug the round harness connector and bulb connectors (driver side: free the harness clip on the bracket first).
6. Install the new lamp in reverse, reuse your factory HID bulbs/ballasts and adjust the aim with the Phillips adjuster.

Steps compiled from 1A Auto "How to Replace Headlight Assemblies 2013-2016 Dodge Dart"; Dodge-Dart.org forum "Step by step on headlight removal" and "How to take off front bumper fascia". Professional installation and headlight aiming are recommended.

FAQs

Will these fit a halogen Dart?
No. Factory HID cars only.

Is the bumper hard to remove?
About 30 fasteners; plan an hour or two.

Do I need to remove the front bumper to replace these headlights?
Yes. The front fascia comes off to reach the headlamp bracket bolts.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.