Clear LED-Tube Tail Lights Pair for Ford F-150 (2009-2014)
$124.95
Passer aux informations sur le produit
Clear LED-Tube Tail Lights Pair for Ford F-150 (2009-2014)
$124.95
DS-BL3Z13405AB-LED
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These tail lights fit Ford F-150 (2009-2014) only. They will not fit Super Duty, 2004-2008 F-150, 2015-up F-150, or Flareside beds. Compare your current housings with our photos before ordering.
Give a twelfth-generation F-150 a cleaner look with this clear LED-tube pair. You get driver and passenger assemblies with a clear lens over LED tubes and a red reflector bar. Reuse your factory reverse bulb. The housings use the factory mounting points and factory-style connectors.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2009-2014 | Ford F-150 | Clear LED-tube housing. Not Super Duty, not 2015-up |
Specs
- Sold as: a driver and passenger pair
- Style: black housing, clear lens, LED tubes
- Lighting: LED tail, brake, and turn; reuse the factory reverse bulb
- DOT certified
- 12 V
- New aftermarket assemblies
- OEM cross-reference: BL3Z13405AB, BL3Z13404AB, BL3Z13405B, BL3Z13404B, FO2818148, FO2818143, FO2819143
What’s in the box
- Driver tail light assembly
- Passenger tail light assembly
Installation
- Open the tailgate so you can reach the bolts behind each bedside lamp.
- Remove the two bolts that hold the assembly to the bedside.
- Pull the housing straight back off the bed, then unplug the factory connector and transfer the reverse bulb if it stays with the harness.
- Seat the new housing on the factory mounting points, reconnect, and tighten the bolts.
- Repeat on the other side, then check tail, brake, turn, and reverse functions before closing the tailgate.
A do-it-yourself installer can usually finish both sides in about 30-45 minutes with basic hand tools. Always disconnect the negative battery cable before you start and torque fasteners to the factory specification.