GENSSI hero — frosted clear halogen tail lights pair Chevy Camaro (2014-2015) white background

Frosted Clear Halogen Tail Lights Pair w/ Bulbs for Chevy Camaro (2014-2015)

$251.95
Passer aux informations sur le produit
GENSSI hero — frosted clear halogen tail lights pair Chevy Camaro (2014-2015) white background

Frosted Clear Halogen Tail Lights Pair w/ Bulbs for Chevy Camaro (2014-2015)

$251.95
DS-CAMARO-TAIL-FROSTED-CLR-HALOGEN-PAIR-2014-2015

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

The stock red tails on a 2014-2015 halogen Camaro look like every other one on the road—this all-clear frosted set gives the rear a clean, bright white-out OE look. GENSSI's Camaro pair is a vehicle-specific set that plugs in with no re-wiring, reuses your factory sockets, and ships with red and clear bulbs.

Important Fitment Note: Fits 2014-2015 Camaro models with factory halogen tail lights only. It does not fit 2014-2015 Camaros with factory LED tail lights.

Fitment

YEAR MAKE / MODEL FITS
2014-2015 Chevy / Camaro, factory halogen tail lights Yes
2014-2015 Chevy / Camaro, factory LED tail lights No

Specs

  • Style: All-clear frosted lens, OE frosted look with a brighter output; polycarbonate lens with UV protection and high impact resistance
  • Bulbs: Halogen / incandescent. Color bulbs included — 4x 7443 red and 2x 921 clear. Sockets are not included — reuse the factory sockets
  • Sold as: Pair — left and right tail light assemblies with 6 color bulbs
  • Fit: Direct replacement for 2014-2015 Chevy Camaro halogen models; plug and play, no re-wiring

Interchange

23256981, 23489170

What's included

  • 1x Driver (left) all-clear frosted tail light
  • 1x Passenger (right) all-clear frosted tail light
  • 4x 7443 red bulbs
  • 2x 921 clear bulbs

Installation — Chevy Camaro (2014-2015)

  1. Park with the lights off. Tools are a flat screwdriver or fastener pliers, a plastic trim tool, and a 10 mm socket. These housings fit 2014-2015 Camaros with factory halogen tail lamps. A factory LED car uses a different housing.
  2. Open the trunk. The 2014-2015 halogen lamp is one housing per side, under a plastic access cover held by three two-piece push rivets. Pry the center pin up, pull the rivet base out, and lift the cover off.
  3. Pinch the tab and unplug the harness. Remove the three 10 mm nuts on the studs behind that housing. The nut toward the quarter panel is the tight one. Crack it loose with the socket, then finish it by hand so it does not drop into the trunk.
  4. Pull the housing straight out. The locating pins can hold it, so wiggle the housing while you pull. Do not pry on the lens.
  5. Twist the sockets out of the old housing. On the 2014-2015 halogen lamp the two outer sockets take 7443 brake and turn bulbs, and the center socket takes the 921 reverse bulb. Move those sockets into the new housing, or install the bulbs from this kit in those same positions, and lock each socket with a quarter turn clockwise.
  6. Set the new housing on the studs, snug the three 10 mm nuts by hand, and plug the harness in. Put the access cover back on, push the rivet bases in, then push the center pins down. Repeat on the other side and check tail, brake, turn, and reverse.

Buyer FAQ

Will the lights still look red when braking? Yes. The lens is all-clear frosted, and the included red 7443 bulbs supply the brake, parking, and signal color while the clear 921 bulbs handle reverse. The clear lens gives a brighter output than the stock red lens.

Do I have to wire or splice anything? No. These are plug and play with no re-wiring. Sockets are not included, so reuse your factory sockets and transfer them into the new housings.

Which Camaros fit, and what is in the box? 2014-2015 Camaros with factory halogen tail lights. The box holds a left and right frosted clear tail light plus four red 7443 and two clear 921 bulbs, matching OEM 23256981 on the left and 23489170 on the right.

Vous aimerez peut-être aussi