Full LED Projector Headlights Pair for Toyota Corolla SE / XSE / XLE (2019-2022)
$316.95
Passer aux informations sur le produit
Full LED Projector Headlights Pair for Toyota Corolla SE / XSE / XLE (2019-2022)
$316.95
DS-8115012L00
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2020-2022 Toyota Corolla sedan (SE, XSE, XLE, Apex, Nightshade and Hybrid LE) and the 2019-2022 Corolla Hatchback (SE, XSE, Nightshade) with factory full LED headlights. They will not fit cars with Adaptive Front Lighting (AFS), the L and LE gas sedans, the older-generation 2019 Corolla sedan, or the 2023 and newer refreshed Corolla. All LEDs and modules come installed.
Give your Corolla the full-LED look it was built for. This pair replaces cloudy, cracked or damaged SE, XSE and XLE headlights with sharp LED projectors, the triple-LED running light bar and LED turn signals, all built in. Each lamp plugs into the factory connectors with no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2020-2022 | Toyota Corolla | Sedan: SE, SE Apex, SE Nightshade, XSE, XSE Apex, XLE and Hybrid LE with factory full LED headlights. Without AFS. |
| 2019-2022 | Toyota Corolla Hatchback | SE, SE Nightshade and XSE with factory full LED headlights. Without AFS. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber side marker
- Low and high beam: LED projector (built in)
- Daytime running light: 3-segment LED bar
- Turn signal and side marker: LED
- Color temperature: about 5000K (cool white)
- DOT compliant
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side full LED headlight assembly
- Passenger-side full LED headlight assembly
- LED light sources and control modules (pre-installed)
Interchange References
Replaces the original assemblies commonly crossed with 81150-12L00, 81110-12L00, 81150-02S50, 81110-02S50, 81150-02P50, 81110-02P50, TO2502272, TO2503272.
Installation: Toyota Corolla SE / XSE / XLE (2019-2022)
On the 2019-2022 Corolla the headlight sits behind the front bumper cover, which has to come off. The sedan and hatchback bumpers fasten a little differently, so follow your body style. Turn the car off and disconnect the 12-volt battery first; on a Hybrid, stay clear of orange high-voltage parts.
- Tape the painted edges. Remove the upper radiator cover, the wheel-liner fasteners and the fasteners under the bumper.
- Release the bumper corners, unplug the bumper wiring and sensors if equipped, and lift the cover away with a helper.
- Remove the headlight mounting bolt and screws, release the lamp guide and clamps, then disconnect all the headlight connectors.
- Plug in the new lamp, seat it on the guides and fasten it.
- Refit the bumper cover, reconnect the battery, test the low beam, high beam, DRL and turn signals, and have the aim checked. Address any front sensor warning if one appears.
Frequently Asked Questions
Which vehicles do these headlights fit?
2020-2022 Corolla sedan SE, XSE, XLE, Apex, Nightshade and Hybrid LE, and 2019-2022 Corolla Hatchback SE, XSE and Nightshade, with factory full LED headlights and no AFS. Not the L / LE gas sedan or 2023+. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Will these fit my Corolla LE?
Only the Hybrid LE sedan. The gas L and LE sedans use a different headlight, which we carry as a separate product.
What is AFS?
AFS (Adaptive Front Lighting System) turns the beams as you steer. These lamps are for cars without AFS.
Are bulbs included?
Yes. All light sources come installed.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2019-2022 Toyota Corolla SE / XSE / XLE?
Remove the front bumper cover, unbolt the headlight and unplug its connectors, then plug in and fasten the new lamp. All LEDs are installed, so there is nothing to transfer.